{"product_id":"robbjack-xg-402-32-corner-radius-end-mill-1-in-4-flute-altin","title":"Robbjack XG-402-32 Corner Radius End Mill 1 in 4 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ROBBJACK XG-402-32 is a solid carbide corner radius end mill designed for precision milling in demanding metalworking applications. It features a 1-inch cutting diameter, a 2-inch length of cut (LOC), and a corner radius range of 0.028 to 0.030 inches. The four-flute, right-hand cutting geometry is paired with an AlTiN coating for extended tool life in abrasive and high-temperature cutting environments. With a 5-inch overall length (OAL) and a 1-inch shank diameter, this end mill is sized for rigid setups on vertical and horizontal machining centers. It is centercutting capable, allowing plunge entry where required.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for finish milling and semi-finish profiling operations on ferrous metals, hardened steels, and high-temperature alloys. The fine pitch flute spacing and right-hand helix promote smooth chip evacuation and surface finish control. It is commonly applied in die and mold work, aerospace component machining, and general precision machining where corner geometry must be held to tight tolerances. A licensed machinist or CNC setup technician handles installation and toolpath programming for this tool type.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1-inch cutting diameter with 2-inch LOC for deep slot and profile work\u003c\/li\u003e\n\u003cli\u003eCorner radius range of 0.028 to 0.030 inches for controlled edge blending\u003c\/li\u003e\n\u003cli\u003eAlTiN coating for heat resistance and extended tool life in ferrous materials\u003c\/li\u003e\n\u003cli\u003eFour-flute, right-hand cut and right-hand helix geometry\u003c\/li\u003e\n\u003cli\u003eCentercutting design permits plunge milling entry\u003c\/li\u003e\n\u003cli\u003eFine pitch flute configuration for improved surface finish\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard 1-inch collet or end mill holder tooling systems on CNC vertical and horizontal machining centers. Part of the ROBBJACK XG-402 series.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a qualified machinist or CNC technician. The shank must be seated fully and evenly in a clean, undamaged collet or end mill holder before torquing the retention nut to the holder specification. Inspect the tool shank and holder bore for chips or runout before use. Follow machine-specific RPM and feed rate guidelines for the workpiece material and do not exceed the tool's rated depth of cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut (LOC)\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.028 to 0.030 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Pitch\u003c\/strong\u003e: Fine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ROBBJACK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: XG-402-32\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ROBBJACK","offers":[{"title":"Default Title","offer_id":52054393454898,"sku":"XG-402-32","price":916.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f54e6a8e3eb5975d02535f8a318e754c.jpg?v=1790036858","url":"https:\/\/voomisupply.com\/products\/robbjack-xg-402-32-corner-radius-end-mill-1-in-4-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}