{"product_id":"robbjack-ts-401-04-square-end-mill-1-8-in-4-flute-carbide","title":"Robbjack TS-401-04 Square End Mill 1\/8 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ROBBJACK TS-401-04 is a solid carbide square end mill designed for precision milling in metal, composite, and engineered material applications. Built to Series TS-401 Tuffy material grade specifications, it features a 1\/8-inch cutting diameter, a 1\/4-inch length of cut, and a stub-length overall length of 1.5 inches. The four-flute spiral geometry delivers efficient chip evacuation and smooth surface finishes at higher feed rates. Right-hand cut and right-hand flute orientation are standard. This tool is installed and operated by machinists and CNC programmers in production and job-shop environments.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for light profiling, slotting, and finish milling passes in tight-clearance or small-feature applications where a stub-length tool reduces deflection. The 1\/8-inch straight cylindrical shank fits standard collet systems. The centercutting design allows plunge entry without a pre-drilled pilot. Uncoated carbide substrate is appropriate for dry cutting or wet cutting of ferrous and non-ferrous materials where coating buildup or adhesion is a concern.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide Tuffy material grade for wear resistance in demanding cuts\u003c\/li\u003e\n  \u003cli\u003e4-flute spiral geometry with right-hand cut and right-hand flute direction\u003c\/li\u003e\n  \u003cli\u003eCentercutting capable  -  allows direct plunge entry\u003c\/li\u003e\n  \u003cli\u003eStub length (1.5 inches OAL) minimizes tool deflection in small-feature milling\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle balances cutting load and chip flow\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank compatible with standard ER and precision collet systems\u003c\/li\u003e\n  \u003cli\u003eUncoated finish  -  no risk of coating delamination on abrasive or gummy materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement or standard selection within the ROBBJACK TS-401 series; fits any toolholder or collet chuck accepting a 1\/8-inch straight cylindrical shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and locked out before inserting or removing the tool from the collet. Seat the shank to the full recommended grip length in the collet and torque the collet nut per the toolholder manufacturer specifications. Verify runout with a dial indicator before commencing a cut, as excessive runout will accelerate edge wear on a small-diameter carbide tool.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.1250 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.2500 inches (1\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5000 inches (1-1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1250 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Tuffy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.060 \/ -0.060 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: TS-401\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0625 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ROBBJACK\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: TS-401-04\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ROBBJACK","offers":[{"title":"Default Title","offer_id":52017694114098,"sku":"TS-401-04","price":41.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fc714ba03b9b56393853d8abf15b32ec_2858f5fa-ddd2-452e-844f-31572dea19ac.jpg?v=1790009614","url":"https:\/\/voomisupply.com\/products\/robbjack-ts-401-04-square-end-mill-1-8-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}