{"product_id":"robbjack-st-630-24-t-3-4-in-6-flute-solid-carbide-square-end-mill","title":"Robbjack ST-630-24-T 3\/4 in 6 Flute Solid Carbide Square End Mill","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ROBBJACK ST-630-24-T is a solid carbide square end mill built for demanding metal removal in professional machining environments. Measuring 0.75 inches in diameter with a 1.5-inch length of cut and 4-inch overall length, this tool handles slotting, profiling, and peripheral milling in a single setup. Six spiral flutes with a 30-degree helix angle promote efficient chip evacuation and smooth cutting action. A TiN (titanium nitride) coating improves surface hardness and extends tool life in ferrous and non-ferrous materials. Right-hand cut and right-hand flute geometry follow standard CNC and manual mill conventions. Centercutting capability allows plunge entry without a pre-drilled hole.\u003c\/p\u003e\n\u003cp\u003eThe ST-630-24-T is suited for general-purpose milling operations in job shops, tool rooms, and production machining. The 0.75-inch shank diameter fits standard ER collets and end mill holders commonly found on vertical machining centers, knee mills, and CNC routers. Its regular-length profile makes it appropriate for most workpiece setups where extended reach is not required. The ST-630 series targets applications involving steel, stainless steel, cast iron, aluminum, and similar materials where a rigid, multi-flute carbide tool is preferred over a high-speed steel alternative.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and heat resistance in high-speed applications\u003c\/li\u003e\n  \u003cli\u003e6 spiral flutes with 30-degree helix angle for efficient chip flow and reduced cutting forces\u003c\/li\u003e\n  \u003cli\u003eTiN coating increases surface hardness and extends wear life\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry into the workpiece\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute geometry compatible with standard spindle rotation\u003c\/li\u003e\n  \u003cli\u003eMatched 0.75-inch cutter and shank diameter for consistent tool holding grip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use tool for standard 3\/4-inch end mill holders, ER collet chucks, and side-lock holders on vertical machining centers, knee mills, and CNC milling machines accepting a 0.75-inch shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. Ensure the machine spindle is fully stopped and locked before inserting or removing the end mill from the tool holder. Seat the shank to the full recommended engagement depth in the collet or holder to minimize runout and prevent pull-out under load. Verify tool holder cleanliness and inspect the shank for burrs or damage before clamping; contamination or shank defects can induce runout and reduce tool life.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.75 inches (3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.5 inches (1-1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.75 inches (3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiN (Titanium Nitride)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.001 \/ -0.000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.060 \/ -0.060 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: ST-630\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ROBBJACK\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ST-630-24-T\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ROBBJACK","offers":[{"title":"Default Title","offer_id":51989102362930,"sku":"ST-630-24-T","price":611.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/02ce03f37216662e6f155a73d29d0e89.jpg?v=1789988029","url":"https:\/\/voomisupply.com\/products\/robbjack-st-630-24-t-3-4-in-6-flute-solid-carbide-square-end-mill","provider":"Voomi Supply","version":"1.0","type":"link"}