{"product_id":"robbjack-sr-2-010-square-end-mill-0-01-in-2-flute-carbide","title":"Robbjack SR-2-010 Square End Mill 0.01 in 2 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ROBBJACK SR-2-010 is a miniature square end mill engineered for precision micro-machining applications. Built from solid carbide in the Tuffy material grade, this single-end tool features a 0.01-inch cutting diameter with a 1\/32-inch (0.03-inch) length of cut and a 1\/8-inch straight cylindrical shank. The 2-flute spiral geometry delivers efficient chip evacuation in tight pockets and slots at small scales. At 1.5 inches overall length, it is compact and rigid. The right-hand cut, right-hand flute configuration is standard for conventional CNC milling setups. This tool is centercutting, allowing direct plunge entry without a pre-drilled pilot hole. Machinists and tool-and-die professionals working in precision shops install and run this class of tooling.\u003c\/p\u003e\n\u003cp\u003eThe SR-2-010 is suited for micro-slot milling, fine-detail profiling, and engraving operations in materials where a small-diameter solid carbide tool provides the rigidity and edge retention needed for accurate results. Typical applications include electronics component machining, mold and die detail work, medical device components, and other precision parts requiring sub-0.1-inch features. The uncoated finish makes this tool appropriate for non-ferrous metals, plastics, graphite, and similar materials where a bare carbide edge performs well. The regular length type keeps deflection minimal at this diameter.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.01-inch cutting diameter for micro-precision milling and fine-detail work\u003c\/li\u003e\n  \u003cli\u003eSolid carbide Tuffy grade construction for rigidity and edge retention at small diameters\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n  \u003cli\u003e2-flute spiral geometry promotes chip clearance in narrow slots and pockets\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle balances cutting forces and surface finish at miniature scale\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute  -  standard orientation for CNC machining centers\u003c\/li\u003e\n  \u003cli\u003eUncoated finish suited for non-ferrous metals, plastics, and graphite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style solid carbide square end mill in the ROBBJACK SR-2 series, compatible with standard 1\/8-inch collets and tool holders on CNC machining centers and high-speed spindles used for micro-machining.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes must be performed with the spindle fully stopped and the machine in an e-stop or powered-down state. Use a precision collet or shrink-fit holder sized for the 1\/8-inch shank to ensure concentricity  -  runout directly affects tool life and feature accuracy at this diameter. Torque the collet nut according to the tool-holder manufacturer specification; do not over-tighten. At 0.01-inch diameter, feed rates and depth of cut must be dialed in carefully to avoid tool breakage; verify toolpath parameters before first cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.01 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.03 inches (1\/32 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Tuffy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0005 \/ -0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.040 \/ -0.040 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SR-2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0625 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ROBBJACK\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: SR-2-010\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ROBBJACK","offers":[{"title":"Default Title","offer_id":67906474049842,"sku":"SR-2-010","price":68.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ee17f1a62b14df315af2b212cd542090_038c003b-680a-43b1-a864-3cee99cc9e63.jpg?v=1791168552","url":"https:\/\/voomisupply.com\/products\/robbjack-sr-2-010-square-end-mill-0-01-in-2-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}