{"product_id":"rivetking-fbf64ce-p100-blind-rivet-size-64-stainless-100-pack","title":"Rivetking FBF64CE\/P100 Blind Rivet Size 64 Stainless 100 Pack","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe RIVETKING FBF64CE\/P100 is a closed end sealing blind rivet supplied in a 100-piece pack. The closed end design seals the rivet body after installation, preventing fluid, gas, and debris from passing through the fastener. It features a dome head profile and an all-stainless steel body and mandrel, making it suitable for corrosive or outdoor environments where standard aluminum or steel rivets would fail prematurely. With a body diameter of 0.1875 inches, a grip range of 0.188 to 0.250 inches, and a tensile strength rated at 900 pounds, this rivet is built for structural reliability in demanding applications. Installation requires a standard pull-type blind rivet tool. Licensed sheet metal, mechanical, and industrial maintenance technicians are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis rivet is used in applications where a weathertight or fluid-resistant fastener is required and backside access is limited or unavailable. Typical installations include HVAC ductwork panels, enclosures, marine hardware, food-service equipment, stainless steel fabrications, and corrosion-prone assemblies. The bright finish stainless construction resists oxidation and staining. Hole preparation requires a Number 11 wire gauge drill bit, with an acceptable hole diameter range of 0.192 to 0.196 inches. This part is packaged in a quantity of 100 units per order.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eClosed end sealing design blocks fluid and debris ingress through the rivet hole after setting\u003c\/li\u003e\n  \u003cli\u003eAll-stainless steel body and mandrel for corrosion resistance in wet or outdoor environments\u003c\/li\u003e\n  \u003cli\u003eDome head profile provides a low-profile finished appearance on the installation surface\u003c\/li\u003e\n  \u003cli\u003e900-pound tensile strength and 850-pound shear strength for structural load-bearing joints\u003c\/li\u003e\n  \u003cli\u003eGrip range of 0.188 to 0.250 inches accommodates typical panel stack-ups in light fabrication\u003c\/li\u003e\n  \u003cli\u003eMeets IFI 126 Grade 51 fastener standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style blind rivet for use wherever a size 64, 3\/16-inch body diameter closed end sealing rivet with a dome head is specified. Accepts standard pull-type blind rivet tools sized for 3\/16-inch body rivets.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed with a standard manual or pneumatic pull-type blind rivet tool rated for 3\/16-inch body rivets. Drill the mating hole to between 0.192 and 0.196 inches using a Number 11 wire gauge bit before installing. Verify the combined material grip thickness falls within 0.188 to 0.250 inches before selecting this rivet for the joint. The mandrel will break flush and the closed end will seal the back of the hole upon full actuation of the tool.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRivet Type\u003c\/strong\u003e: Closed End Sealing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize Code\u003c\/strong\u003e: 64\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTensile Strength\u003c\/strong\u003e: 900 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShear Strength\u003c\/strong\u003e: 850 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Diameter\u003c\/strong\u003e: 0.1875 inches (3\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 0.060 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 0.531 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Grip\u003c\/strong\u003e: 0.188 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Grip\u003c\/strong\u003e: 0.250 inches (1\/4 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Hole Diameter\u003c\/strong\u003e: 0.192 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Hole Diameter\u003c\/strong\u003e: 0.196 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Size\u003c\/strong\u003e: Number 11 wire gauge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Type\u003c\/strong\u003e: Dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMandrel Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Bright\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFastener Standard\u003c\/strong\u003e: IFI 126 Grade 51\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.47 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: RIVETKING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: FBF64CE\/P100\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RIVETKING","offers":[{"title":"Default Title","offer_id":52099185639730,"sku":"FBF64CE\/P100","price":131.17,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/bab1ca7baa13324a8773caf72c35ce6f.jpg?v=1790068099","url":"https:\/\/voomisupply.com\/products\/rivetking-fbf64ce-p100-blind-rivet-size-64-stainless-100-pack","provider":"Voomi Supply","version":"1.0","type":"link"}