{"product_id":"rivetking-absm4-8x27pl100-peel-blind-rivet-100-pack","title":"Rivetking ABSM4.8X27PL100 Peel Blind Rivet 100 Pack","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe RIVETKING ABSM4.8X27PL100 is a dome-head peel blind rivet designed for applications where the blind side of the joint requires a wide, distributed clamp load. The aluminum body with steel mandrel construction gives this rivet a balance of corrosion resistance and pulling strength. With a body diameter of 0.1875 inches (3\/16 inches), a grip range of 0.188 to 0.866 inches, and a zinc-plated finish, it handles a broad range of material stack thicknesses in a single SKU. Tensile strength is rated at 353 pounds and shear strength at 405 pounds. This package contains 100 rivets.\u003c\/p\u003e\n\u003cp\u003ePeel blind rivets are used when the mandrel-driven petal expansion on the blind side must grip soft, fragile, or uneven materials without pulling through. Typical applications include fastening insulation panels, thin sheet metal, plastics, wood composites, and similar low-density substrates in HVAC ductwork fabrication, electrical enclosures, RV and trailer assembly, and light structural assembly work. The 0.866-inch maximum grip makes this rivet suitable for joining thicker multi-layer stacks where a standard blind rivet would bottom out before achieving full clamp. Installers in sheet metal, mechanical, and general construction trades use this rivet regularly.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePeel design expands blind-side petals for wide load distribution on soft or thin materials\u003c\/li\u003e\n  \u003cli\u003eAluminum body resists corrosion in light-duty interior and semi-exposed environments\u003c\/li\u003e\n  \u003cli\u003eSteel mandrel provides consistent pull force and reliable stem break\u003c\/li\u003e\n  \u003cli\u003eZinc-plated finish adds surface protection\u003c\/li\u003e\n  \u003cli\u003eWide grip range of 0.188 to 0.866 inches accommodates varied stack thicknesses\u003c\/li\u003e\n  \u003cli\u003eRated 353 pounds tensile and 405 pounds shear strength\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard blind rivet tools accepting 3\/16-inch body diameter rivets. Suitable for aluminum, steel, plastic, and composite substrates within the stated grip and hole diameter range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall with a hand, pneumatic, or battery-powered blind rivet tool sized for a 3\/16-inch mandrel. Drill or punch the mating hole to 0.196 inches for proper fit. Confirm total material stack thickness falls within the 0.188 to 0.866-inch grip range before setting. Do not attempt to re-use a set rivet or reset a spent mandrel.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRivet Type\u003c\/strong\u003e: Peel Blind Rivet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Type\u003c\/strong\u003e: Dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMandrel Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Zinc-Plated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Diameter\u003c\/strong\u003e: 0.1875 inches (3\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 0.079 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Grip\u003c\/strong\u003e: 0.188 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Grip\u003c\/strong\u003e: 0.866 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Hole Diameter\u003c\/strong\u003e: 0.196 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Hole Diameter\u003c\/strong\u003e: 0.196 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 1.012 to 1.063 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTensile Strength\u003c\/strong\u003e: 353 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShear Strength\u003c\/strong\u003e: 405 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: RIVETKING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ABSM4.8X27PL100\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RIVETKING","offers":[{"title":"Default Title","offer_id":51991786258738,"sku":"ABSM4.8X27PL100","price":53.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1424287f5571b9b415054e395a17a43f.jpg?v=1789989900","url":"https:\/\/voomisupply.com\/products\/rivetking-absm4-8x27pl100-peel-blind-rivet-100-pack","provider":"Voomi Supply","version":"1.0","type":"link"}