{"product_id":"rivetking-absm4-8x18pl100-peel-blind-rivet-3-16-in-100-pack","title":"Rivetking ABSM4.8X18PL100 Peel Blind Rivet 3\/16 in 100 Pack","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe RIVETKING ABSM4.8X18PL100 is a peel blind rivet designed for applications that require a wide, distributed clamping footprint on the blind side of the joint. The aluminum body splits into petals upon installation, spreading outward to grip soft, fragile, or oversized-hole materials without pulling through. The steel mandrel provides the driving force before breaking off at the set point. With a 3\/16-inch body diameter, a dome head 3\/8 inches in diameter, and a grip range of 0.188 to 0.512 inches, this rivet handles a substantial range of material stack thicknesses. Tensile strength is rated at 353 pounds and shear strength at 405 pounds. This package contains 100 rivets.\u003c\/p\u003e\n\u003cp\u003ePeel blind rivets are used where standard closed-end or open-end rivets would pull through or insufficiently clamp thin, soft, or brittle base materials such as plastics, fiberglass, foam-core panels, rubber gaskets, and thin sheet metal. Common install scenarios include HVAC duct access panels, equipment enclosures, signage, and light-gauge sheet metal assemblies. The zinc-plated finish adds corrosion resistance for indoor and sheltered outdoor environments. Tradespeople working in sheet metal fabrication, HVAC installation, and light manufacturing will find this rivet appropriate for controlled-pull applications where backside access is limited.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePeel action spreads the aluminum body into petals on the blind side for a wide bearing surface\u003c\/li\u003e\n  \u003cli\u003eDome head profile at 3\/8 inches diameter provides a low-profile, finished appearance\u003c\/li\u003e\n  \u003cli\u003eGrip range of 0.188 to 0.512 inches accommodates varying material stack thicknesses\u003c\/li\u003e\n  \u003cli\u003eSteel mandrel delivers consistent set force before breaking clean at the break point\u003c\/li\u003e\n  \u003cli\u003eZinc-plated finish resists corrosion in sheltered environments\u003c\/li\u003e\n  \u003cli\u003eSold in a 100-piece package for job-site or shop use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in any standard rivet tool that accepts 3\/16-inch body diameter blind rivets with a minimum hole diameter of 0.196 inches. Suitable for aluminum, thin steel, plastic, fiberglass, and other materials within the 0.188 to 0.512 inch grip range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall using a manual or pneumatic blind rivet tool sized for 3\/16-inch rivets. Drill or punch the hole to the specified diameter before setting the rivet. Inspect the set head on the blind side where accessible to confirm full petal deployment. Do not use peel rivets as structural fasteners in high-vibration or high-load joints without verifying tensile and shear ratings against the application load.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRivet Type\u003c\/strong\u003e: Peel Blind\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMandrel Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Type\u003c\/strong\u003e: Dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Diameter\u003c\/strong\u003e: 3\/16 inches (0.1875 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 3\/8 inches (0.375 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 0.079 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Grip\u003c\/strong\u003e: 0.188 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Grip\u003c\/strong\u003e: 0.512 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Hole Diameter\u003c\/strong\u003e: 0.196 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Hole Diameter\u003c\/strong\u003e: 0.196 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 0.709 to 0.748 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTensile Strength\u003c\/strong\u003e: 353 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShear Strength\u003c\/strong\u003e: 405 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Zinc-Plated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: RIVETKING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ABSM4.8X18PL100\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RIVETKING","offers":[{"title":"Default Title","offer_id":52094839456050,"sku":"ABSM4.8X18PL100","price":34.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8f1bc4ba2c632062a0770c4772f4660f_7998538c-834d-41b4-b5e5-495b2a38b0ae.jpg?v=1790065422","url":"https:\/\/voomisupply.com\/products\/rivetking-absm4-8x18pl100-peel-blind-rivet-3-16-in-100-pack","provider":"Voomi Supply","version":"1.0","type":"link"}