{"product_id":"rivetking-abs41ce-p500-blind-rivet-size-41-dome-head-500pk","title":"Rivetking. ABS41CE\/P500 Blind Rivet Size 41 Dome Head 500pk","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe RIVETKING. ABS41CE\/P500 is a closed end sealing blind rivet designed to prevent liquid and gas infiltration through the rivet hole after installation. The aluminum body pairs with a phosphate-finished steel mandrel for corrosion resistance on the body with reliable mandrel break performance. At size 41, the rivet features a 1\/8-inch body diameter, a 1\/4-inch dome head, and a grip range of 0.020 to 0.063 inches, making it suited for thin-material fastening applications. Tensile strength is rated at 280 pounds and shear strength at 240 pounds per IFI 126 Grade 19 standards. This part ships in a package quantity of 500.\u003c\/p\u003e\n\u003cp\u003eThis rivet is used in applications where the fastened joint must remain sealed against moisture, air, or contaminants. Typical install scenarios include HVAC ductwork panels, electrical enclosures, plumbing access covers, and light-gauge sheet metal assemblies where a standard open-end rivet would leave an unacceptable through-hole. The closed end design retains the broken mandrel stem inside the rivet body, maintaining the seal. Suitable for residential and light commercial trade use wherever thin aluminum sheet stock requires a clean, sealed mechanical fastener.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eClosed end design seals the rivet hole against liquid and gas passage after installation\u003c\/li\u003e\n  \u003cli\u003eAluminum body with phosphate-finished steel mandrel for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eDome head profile with 1\/4-inch head diameter and 0.040-inch head height\u003c\/li\u003e\n  \u003cli\u003eGrip range of 0.020 to 0.063 inches accommodates thin sheet material stacks\u003c\/li\u003e\n  \u003cli\u003eTensile strength of 280 pounds and shear strength of 240 pounds per IFI 126 Grade 19\u003c\/li\u003e\n  \u003cli\u003ePackage quantity of 500 units for production or service volume use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in applications requiring a No. 30 wire-gauge drill hole (0.129 to 0.133 inches) in aluminum or similar light-gauge sheet materials. Conforms to IFI 126 Grade 19 fastener standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall with a standard blind rivet pulling tool rated for 1\/8-inch body diameter rivets. Ensure the mating hole is drilled to the specified diameter range of 0.129 to 0.133 inches using a No. 30 wire-gauge drill bit for proper mandrel pull and head seating. De-energize or de-pressurize any panel or assembly before beginning fastener work on live enclosures or pressurized ductwork. Do not exceed the rated grip range, as over- or under-thickness material stacks will compromise the seal and clamp load.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRivet Type\u003c\/strong\u003e: Closed End Sealing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize Code\u003c\/strong\u003e: 41\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Aluminum (Grade 5056)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMandrel Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Phosphate (Mandrel)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Type\u003c\/strong\u003e: Dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 0.250 inches (1\/4 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 0.040 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 0.297 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Grip\u003c\/strong\u003e: 0.020 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Grip\u003c\/strong\u003e: 0.063 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Hole Diameter\u003c\/strong\u003e: 0.129 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Hole Diameter\u003c\/strong\u003e: 0.133 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Size\u003c\/strong\u003e: No. 30 (Wire)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTensile Strength\u003c\/strong\u003e: 280 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShear Strength\u003c\/strong\u003e: 240 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFastener Standard\u003c\/strong\u003e: IFI 126 Grade 19\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 500\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.9 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: RIVETKING.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ABS41CE\/P500\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RIVETKING","offers":[{"title":"Default Title","offer_id":52092508668210,"sku":"ABS41CE\/P500","price":78.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/17164da34b35dfd2f80173681bbf9c6b.jpg?v=1790063859","url":"https:\/\/voomisupply.com\/products\/rivetking-abs41ce-p500-blind-rivet-size-41-dome-head-500pk","provider":"Voomi Supply","version":"1.0","type":"link"}