{"product_id":"riten-71051-solid-dead-center-5mt-morse-taper-1-748-in","title":"Riten 71051 Solid Dead Center 5MT Morse Taper 1.748 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe RITEN 71051 is a solid dead center designed for use in lathes and turning centers where a fixed, non-rotating support point is required at the tailstock or between centers. Machined from hardened tool steel, this dead center features a 5MT Morse taper shank and a standard-point geometry with a head diameter of 1.748 inches and an overall length of 8.5 inches. With a stated accuracy of 0.00005 inches, it is suited for precision turning applications where runout and deflection must be minimized. This style of center does not rotate with the workpiece and is typically used at lower speeds with adequate lubrication.\u003c\/p\u003e\u003cp\u003eThe RITEN 71051 is used in manual and CNC lathes equipped with a No. 5 Morse taper tailstock. It is a standard fitment for shops performing between-centers turning on medium to large workpieces. Typical applications include shaft turning, cylindrical grinding setups, and general-purpose turning operations in job shops, toolrooms, and production environments. Installation and use require the operator to observe appropriate spindle speed limits for a dead-center configuration.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHardened tool steel construction for wear resistance and long service life\u003c\/li\u003e\n\u003cli\u003e5MT Morse taper shank for direct tailstock mounting without an adapter\u003c\/li\u003e\n\u003cli\u003eStandard point geometry with 1.748 inch point diameter\u003c\/li\u003e\n\u003cli\u003ePrecision accuracy of 0.00005 inches for tight-tolerance turning work\u003c\/li\u003e\n\u003cli\u003eKnockout diameter of 1.475 inches for standard drift ejection\u003c\/li\u003e\n\u003cli\u003ePoint to gauge line measurement of 3.3125 inches for setup reference\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in lathes and turning centers with a No. 5 Morse taper tailstock bore.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a machinist or lathe operator. Power down and bring the spindle to a complete stop before seating or removing the center. Clean the Morse taper bore and shank thoroughly before insertion to ensure full seating and accurate alignment. Because this is a solid dead center, apply suitable lubricant to the center point contact area and observe appropriate speed limits to prevent galling or workpiece damage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Type\u003c\/strong\u003e: Solid Dead Center\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Hardened Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Morse Taper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Taper Size\u003c\/strong\u003e: 5MT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Style\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 1.748 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Diameter\u003c\/strong\u003e: 1.748 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 8.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKnockout Diameter\u003c\/strong\u003e: 1.475 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint to Gauge Line\u003c\/strong\u003e: 3.3125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy\u003c\/strong\u003e: 0.00005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbide-Tipped\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: RITEN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 71051\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RITEN","offers":[{"title":"Default Title","offer_id":67918569439538,"sku":"71051","price":436.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fe43827264f6ca76df1c133c919834ed.jpg?v=1791271144","url":"https:\/\/voomisupply.com\/products\/riten-71051-solid-dead-center-5mt-morse-taper-1-748-in","provider":"Voomi Supply","version":"1.0","type":"link"}