{"product_id":"riten-44904-live-center-mt4-taper-shank-tracer-point","title":"Riten 44904 Live Center MT4 Taper Shank Tracer Point","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe RITEN 44904 is a live center designed for use in lathes and turning machines where precise, high-load workpiece support is required. It features a Morse Taper 4 (MT4) shank, a tracer-style point with a 0.5 inch diameter and 2 inch length, and a triple-row bearing assembly that supports loads up to 2,200 pounds. The head diameter measures 2.375 inches. Sealed, life-lubricated bearings protect internal components from coolant and contaminants, making this center suitable for wet or dry cutting environments. Licensed machinists and CNC lathe operators are the primary installers and users of this tooling.\u003c\/p\u003e\u003cp\u003eThe RITEN 44904 is suited for precision turning applications in both production and job-shop environments. The tracer point geometry accommodates workpieces where access near the tailstock end is limited, and the MT4 shank seats directly into compatible lathe tailstocks. With a maximum rated workpiece weight of 900 pounds and a maximum spindle speed of 2,500 RPM, this center handles a wide range of shaft, cylinder, and component turning tasks. It is applicable to manual engine lathes and CNC turning centers equipped with MT4 tailstock bores.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMT4 taper shank for direct tailstock mounting without adapters on compatible machines\u003c\/li\u003e\n\u003cli\u003eTriple-row bearing design rated to 2,200 pound load capacity\u003c\/li\u003e\n\u003cli\u003eTracer point style with 0.5 inch diameter and 2 inch point length for access in tight workpiece geometries\u003c\/li\u003e\n\u003cli\u003eSealed bearings lubricated for life and protected against coolant and contaminant ingress\u003c\/li\u003e\n\u003cli\u003eThrough-hardened points at 61-63 Rc for extended wear resistance\u003c\/li\u003e\n\u003cli\u003eRunout accuracy of 0.0002 inch for consistent concentricity during turning operations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in lathe tailstocks with a Morse Taper 4 bore. Specific machine compatibility should be verified against the tailstock taper specification of the lathe in use.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or lathe operators. Before seating the center, power down and lock out the lathe per OSHA lockout\/tagout procedures. Clean the tailstock bore and the MT4 shank thoroughly before insertion to ensure full taper engagement and accurate runout. Note that this center is non-repairable and should be replaced rather than serviced if bearing wear is detected.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Taper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper Size\u003c\/strong\u003e: MT4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Style\u003c\/strong\u003e: Tracer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 2.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 60 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing Type\u003c\/strong\u003e: Triple Row\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity\u003c\/strong\u003e: 2,200 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Workpiece Weight\u003c\/strong\u003e: 900 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 2,500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccuracy\u003c\/strong\u003e: 0.0002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGage Line Clearance\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbide-Tipped Point\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: RITEN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 44904\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RITEN","offers":[{"title":"Default Title","offer_id":67914912039218,"sku":"44904","price":500.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/454ed56a542e3346877497121a786c0b.jpg?v=1791251539","url":"https:\/\/voomisupply.com\/products\/riten-44904-live-center-mt4-taper-shank-tracer-point","provider":"Voomi Supply","version":"1.0","type":"link"}