{"product_id":"rh-peterson-g46-18-20-11-triple-t-vented-gas-burner-40k-btu","title":"Rh Peterson G46-18\/20-11 Triple T Vented Gas Burner 40K Btu","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe RH PETERSON G46-18\/20-11 is an ANSI-certified Triple T vented natural gas burner designed for single-sided, indoor fireplaces. It produces up to 40,000 BTU\/h and operates on a millivolt ignition system with a factory-installed pilot kit and included on\/off remote control. The burner features a main center tube with a smaller front flame tube that extends forward, creating additional flame ports and a deep bed of glowing embers. This three-point flame design produces lively, realistic fire appearance without requiring electronic ignition power. Licensed gas technicians install this unit as part of a complete vented gas log system.\u003c\/p\u003e\n\u003cp\u003eThis burner is intended for single-sided indoor fireplaces burning natural gas. It accommodates compatible Real-Fyre log sets in 18-inch and 20-inch sizes, sold separately. The minimum firebox dimensions required are 26 inches wide at the front, 20 inches wide at the rear, 20 inches deep, and 15 inches tall. The tapered burner body allows the pilot kit to mount on the angled side rather than the end, cutting required side clearance by more than half compared to conventional designs. Mobile home installation is approved. The APK-11 on\/off safety valve and RR-1 remote transmitter and receiver are pre-installed. An upgrade to the RR-2 Deluxe Remote with thermostat, timer, and room temperature display is available separately.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eANSI-certified burner with factory-installed pilot kit\u003c\/li\u003e\n  \u003cli\u003eTriple T design with front flame tube and three additional flame ports for realistic fire depth\u003c\/li\u003e\n  \u003cli\u003eMillivolt standing pilot stays lit continuously, allowing remote or manual on\/off control\u003c\/li\u003e\n  \u003cli\u003eIncludes APK-11 safety valve, RR-1 on\/off remote, grate, glowing embers, sand, connector kit, log locators, and damper clamp\u003c\/li\u003e\n  \u003cli\u003eTapered body reduces side clearance requirement by more than half versus standard burner designs\u003c\/li\u003e\n  \u003cli\u003eApproved for mobile home installation\u003c\/li\u003e\n  \u003cli\u003eCompatible with 18-inch and 20-inch Real-Fyre gas log sets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eThis burner is certified to work with specific Real-Fyre log sets in 18-inch and 20-inch allowable sizes only. Burners are not universal. Using a non-compatible log set creates risk of fire, carbon monoxide poisoning, and property damage. Log set is sold separately. Refer to RH PETERSON compatibility documentation to confirm the correct log set before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation must be performed by a licensed gas technician in accordance with local codes and the appliance manufacturer instructions. Shut off the gas supply at the main valve before connecting or servicing any burner components. Verify fireplace dimensions meet the minimum clearance requirements before fitting the burner. The damper must be permanently blocked open when a vented gas log burner is in service, per standard vented appliance requirements.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBTU\/h (Max)\u003c\/strong\u003e: 40,000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFuel Type\u003c\/strong\u003e: Natural Gas\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIgnition Type\u003c\/strong\u003e: Millivolt (Remote Ready)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemote Control\u003c\/strong\u003e: Included (RR-1 On\/Off)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInlet Gas Pressure (Min)\u003c\/strong\u003e: 5.0 inches w.c.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInlet Gas Pressure (Max)\u003c\/strong\u003e: 10.5 inches w.c.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGas Connection Size\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAllowable Log Set Sizes\u003c\/strong\u003e: 18 inches and 20 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Firebox Width (Front)\u003c\/strong\u003e: 26 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Firebox Width (Rear)\u003c\/strong\u003e: 20 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Firebox Depth\u003c\/strong\u003e: 20 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Firebox Height\u003c\/strong\u003e: 15 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVenting Type\u003c\/strong\u003e: Vented\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFireplace Style\u003c\/strong\u003e: Single Sided\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLocation of Use\u003c\/strong\u003e: Indoor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMobile Home Approved\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertification\u003c\/strong\u003e: ANSI Certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: RH PETERSON\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: G46-18\/20-11\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RH PETERSON","offers":[{"title":"Default Title","offer_id":51284032291122,"sku":"G46-18\/20-11","price":1584.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309279966.jpg?v=1781066672","url":"https:\/\/voomisupply.com\/products\/rh-peterson-g46-18-20-11-triple-t-vented-gas-burner-40k-btu","provider":"Voomi Supply","version":"1.0","type":"link"}