{"product_id":"rectorseal-m20729-condenser-fan-motor-1-3-hp-208-230v","title":"Rectorseal m20729 Condenser Fan Motor 1\/3 Hp 208-230V","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe RECTORSEAL m20729 is a totally enclosed, single-phase outdoor condenser fan motor rated at 1\/3 HP and 208-230 volts with a fixed speed of 1075 RPM. It uses a ball bearing design engineered for high-temperature outdoor environments, carrying a 70 degrees C rating under the SunSlinger designation. The motor runs on a 7.5 MFD capacitor at 370 volts and draws 2.4 full-load amps. It is built for continuous duty with Class B insulation and includes an integrated thermal overload protector. Licensed HVAC technicians install this motor as a direct OEM-style replacement in residential and light commercial condensing units.\u003c\/p\u003e\n\u003cp\u003eThis motor is designed for outdoor condenser fan applications where heat resistance and reliable bearing life are critical. The NEMA 48 frame accommodates multiple mounting configurations including thru-bolt, band mounting, Rheem bolt pattern with pre-installed screws, and Trane 4.33-inch bolt circle holes with self-tapping screws. A water slinger on the shaft helps protect against moisture ingestion during outdoor operation. The capacitor requirement is noted directly on the motor label, simplifying replacement verification in the field.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eTotally enclosed construction rated for outdoor condenser fan duty\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature 70 degrees C SunSlinger rating for demanding ambient conditions\u003c\/li\u003e\n  \u003cli\u003eBall bearing design for extended service life under continuous duty cycles\u003c\/li\u003e\n  \u003cli\u003ePre-installed Rheem mounting screws and Trane 4.33-inch bolt circle self-tapping screws included\u003c\/li\u003e\n  \u003cli\u003eWater slinger on shaft for moisture protection\u003c\/li\u003e\n  \u003cli\u003eThermal overload protection with Class B insulation\u003c\/li\u003e\n  \u003cli\u003eCapacitor requirement labeled directly on motor for easy field verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement condenser fan motor with mounting provisions for Rheem and Trane bolt patterns; verify shaft diameter, rotation direction, capacitor rating, and voltage before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed HVAC technician. Disconnect and lock out all power to the condensing unit before removing the existing motor. Confirm rotation direction is REV (counterclockwise when viewed from the shaft end) and match the 7.5 MFD capacitor rating before energizing. Verify that the selected mounting configuration aligns with the unit manufacturer bracket before securing hardware.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorsepower\u003c\/strong\u003e: 1\/3 HP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage Rating\u003c\/strong\u003e: 208-230 volts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Load Amps\u003c\/strong\u003e: 2.4 amps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeed\u003c\/strong\u003e: 1075 RPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCapacitor Rating\u003c\/strong\u003e: 7.5 MFD at 370 volts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePhase\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRotation\u003c\/strong\u003e: Reverse (REV)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShaft Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNEMA Frame Size\u003c\/strong\u003e: 48\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeeds\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsulation Class\u003c\/strong\u003e: Class B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDuty\u003c\/strong\u003e: Continuous\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThermal Protection\u003c\/strong\u003e: Thermal overload included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: 70 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: RECTORSEAL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: m20729\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RECTORSEAL","offers":[{"title":"Default Title","offer_id":51267944120626,"sku":"M20729","price":151.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/308912719.png?v=1780695123","url":"https:\/\/voomisupply.com\/products\/rectorseal-m20729-condenser-fan-motor-1-3-hp-208-230v","provider":"Voomi Supply","version":"1.0","type":"link"}