{"product_id":"proto-jscv08s-combination-wrench-1-4-in-15-deg-offset","title":"Proto JSCV08S Combination Wrench 1\/4 in 15 Deg Offset","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PROTO JSCV08S is a ratcheting combination wrench designed for fastener work in tight spaces where full-swing access is limited. Built from steel with a corrosion-resistant chrome finish, this wrench features a 12-point box end with a 15-degree offset head angle and a straight handle. The reversing ratchet mechanism allows both tightening and loosening without removing the wrench from the fastener. At 3.125 inches overall length and 0.05 pounds, it is compact enough for confined installations yet built to ASME standards. The tether-capable design makes it suitable for elevated or overhead work where dropped-tool protocols are required.\u003c\/p\u003e\n\u003cp\u003eThe JSCV08S is sized for 1\/4-inch fasteners and fits common applications across mechanical, HVAC, plumbing, and electrical service work where small-format hardware is encountered. Its compact overall length suits instrument panel work, equipment access panels, and tight equipment bays. The chrome finish resists corrosion in field conditions. Licensed tradespeople and service technicians working on commercial or residential equipment will find the reversing ratchet head particularly useful when cycling fasteners without repositioning.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eRatcheting and reversing box end for efficient fastener cycling without wrench removal\u003c\/li\u003e\n  \u003cli\u003e15-degree offset head angle improves clearance in confined work areas\u003c\/li\u003e\n  \u003cli\u003e12-point box end engages fasteners at multiple positions for restricted-swing situations\u003c\/li\u003e\n  \u003cli\u003eTether-capable design supports dropped-object prevention in elevated or overhead work\u003c\/li\u003e\n  \u003cli\u003eChrome finish over steel construction provides corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eMeets ASME standards for hand tool performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with 1\/4-inch fasteners across general mechanical and trade service applications. Compatible with standard SAE hex fasteners requiring a 1\/4-inch wrench size.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInspection and service of equipment should be performed with power, pressure, or fuel sources isolated before using hand tools on fasteners. This wrench is intended for use by qualified trade professionals following applicable safety procedures. The reversing lever should be set to the correct direction before applying torque to avoid accidental fastener loosening. When used in elevated environments, attach the tether point to an approved tool lanyard per site dropped-object protocols.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Size\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Offset Angle\u003c\/strong\u003e: 15 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Points\u003c\/strong\u003e: 12\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandle Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRatcheting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReversing\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTether Style\u003c\/strong\u003e: Tether Capable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Chrome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorrosion Resistant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-Sparking\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMagnetic\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 5.5 inches L x 1.77 inches W x 0.98 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PROTO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: JSCV08S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PROTO","offers":[{"title":"Default Title","offer_id":51544472781106,"sku":"JSCV08S","price":30.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3653a5d44ae0883192428c31d4192bea_7cc8f3f5-34ab-4d56-81ba-961542e6a0b4.jpg?v=1785927286","url":"https:\/\/voomisupply.com\/products\/proto-jscv08s-combination-wrench-1-4-in-15-deg-offset","provider":"Voomi Supply","version":"1.0","type":"link"}