{"product_id":"proto-j325agah120-angle-die-grinder-0-30-hp-24000-rpm","title":"Proto J325AGAH120 Angle Die Grinder 0.30 Hp 24000 Rpm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PROTO J325AGAH120 is an angle die grinder designed for precision grinding, deburring, and surface finishing in industrial and trade environments. Powered by compressed air, it delivers 0.30 horsepower at 24,000 RPM with an air consumption of 2.70 CFM at 90 psi. The rear exhaust design directs airflow away from the workpiece, keeping the work area clear of debris and coolant. The 1\/4 inch collet accepts a wide range of mounted points, carbide burrs, and abrasive wheels. At 1.766 pounds, the tool is light enough for extended overhead or confined-space use. Licensed trades and industrial mechanics rely on this class of grinder for weld cleanup, port matching, and material removal in tight access areas.\u003c\/p\u003e\n\u003cp\u003eThe J325AGAH120 is suited for use in fabrication shops, maintenance facilities, automotive service bays, and pipefitting applications. Its angle handle geometry allows access to recessed welds, inside corners, and tube interiors where a straight-body grinder cannot reach. The tool operates on a standard shop air supply at 90 psi, making it compatible with most industrial compressor setups without additional regulators in typical applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAngle die grinder configuration for access to confined and recessed work areas\u003c\/li\u003e\n  \u003cli\u003e24,000 RPM free speed for efficient material removal with mounted abrasives\u003c\/li\u003e\n  \u003cli\u003e1\/4 inch collet accepts standard mounted points, burrs, and abrasive accessories\u003c\/li\u003e\n  \u003cli\u003eRear exhaust routes airflow away from the workpiece and operator\u003c\/li\u003e\n  \u003cli\u003e0.30 HP air motor with 2.70 CFM consumption at 90 psi\u003c\/li\u003e\n  \u003cli\u003eLightweight at 1.766 pounds for reduced fatigue during extended use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard 1\/4 inch shank mounted points, carbide burrs, and abrasive wheels. Operates on compressed air systems supplying 90 psi at a minimum of 2.70 CFM at the tool inlet.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall this grinder on a properly sized air line with a filtered, lubricated air supply to maintain tool performance and service life. Shut off and bleed the air line before changing collet accessories. Verify that the collet nut is fully tightened before operating. Always use accessories rated for the free speed of this tool; never exceed the RPM rating printed on the abrasive accessory.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Angle Die Grinder\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorsepower\u003c\/strong\u003e: 0.30 HP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFree Speed\u003c\/strong\u003e: 24,000 RPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeed Range\u003c\/strong\u003e: 18,000 to 24,999 RPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCollet Size\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAir Consumption\u003c\/strong\u003e: 2.70 CFM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Air Pressure\u003c\/strong\u003e: 90 psi (620 kPa \/ 6.20 bar)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExhaust Location\u003c\/strong\u003e: Rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandle Type\u003c\/strong\u003e: Angle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 8.03 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3.94 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 1.91 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.766 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112700\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PROTO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: J325AGAH120\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PROTO","offers":[{"title":"Default Title","offer_id":51542198124850,"sku":"J325AGAH120","price":204.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/34ae8700ab2d63031ad87eea23292684.jpg?v=1785894907","url":"https:\/\/voomisupply.com\/products\/proto-j325agah120-angle-die-grinder-0-30-hp-24000-rpm","provider":"Voomi Supply","version":"1.0","type":"link"}