{"product_id":"proto-j1230spl-combination-wrench-15-16-inch-chrome-steel","title":"Proto J1230SPL Combination Wrench 15\/16 Inch Chrome Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PROTO J1230SPL is a 15\/16-inch combination wrench built for professional trade use in mechanical, HVAC, plumbing, and industrial service applications. It features a 12-point box end with a 15-degree offset angle and a straight open end, giving technicians flexibility when working in confined spaces or on fasteners with limited swing clearance. The wrench measures 12-7\/8 inches overall length and weighs 0.97 pounds. Constructed from steel with a corrosion-resistant chrome finish, it meets ASME B107.100-2010 standards. The tether-capable design supports use in elevated or drop-hazard environments where tool retention is required by site safety protocols.\u003c\/p\u003e\n\u003cp\u003eThis wrench is suited for residential and commercial mechanical work involving 15\/16-inch fasteners across HVAC equipment, pipe flanges, structural hardware, and general service tasks. The 15-degree head offset allows engagement in tight clearances where a flat wrench cannot reach. The straight handle and chrome finish make it easy to clean and maintain in field conditions. Licensed tradespeople and service technicians working in industrial, commercial, or utility environments will find the tether-capable feature especially relevant on elevated work platforms or in confined-space entry situations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e15\/16-inch 12-point box end for positive engagement on hex fasteners with reduced rounding risk\u003c\/li\u003e\n  \u003cli\u003e15-degree head offset angle provides clearance in tight or obstructed fastener locations\u003c\/li\u003e\n  \u003cli\u003eChrome-finish steel construction with corrosion resistance for long service life\u003c\/li\u003e\n  \u003cli\u003eTether-capable design supports drop-prevention compliance in elevated or safety-critical work areas\u003c\/li\u003e\n  \u003cli\u003eMeets ASME B107.100-2010 combination wrench standard\u003c\/li\u003e\n  \u003cli\u003eBacked by a lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard 15\/16-inch combination wrench for use with SAE hex fasteners across mechanical, HVAC, plumbing, and industrial service applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis wrench is intended for use by qualified tradespeople including HVAC technicians, plumbers, pipefitters, and mechanical contractors. Before servicing any equipment, de-energize electrical systems and isolate fluid or pressure lines per applicable codes. When working at height or in drop-hazard zones, attach the wrench to an approved tether anchor point using a compatible tether lanyard. Do not use the wrench as a hammer or apply extension bars beyond the design intent of the handle.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Size\u003c\/strong\u003e: 15\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Points\u003c\/strong\u003e: 12\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Offset Angle\u003c\/strong\u003e: 15 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 12-7\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Thickness\u003c\/strong\u003e: 9\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandle Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Chrome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorrosion Resistant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTether Style\u003c\/strong\u003e: Tether Capable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRatcheting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-Sparking\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.97 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 13.4 inches L x 2 inches W x 0.4 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASME B107.100-2010\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PROTO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: J1230SPL\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PROTO","offers":[{"title":"Default Title","offer_id":51541484994866,"sku":"J1230SPL","price":65.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1825d66a6e8f71fbe2d5f884ed32a5a8.jpg?v=1785877501","url":"https:\/\/voomisupply.com\/products\/proto-j1230spl-combination-wrench-15-16-inch-chrome-steel","provider":"Voomi Supply","version":"1.0","type":"link"}