{"product_id":"proto-j1228s-combination-wrench-7-8-inch-15-deg-offset","title":"Proto J1228S Combination Wrench 7\/8 Inch 15 Deg Offset","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PROTO J1228S is a 7\/8 inch combination wrench built for professional trade use in mechanical, plumbing, HVAC, and electrical applications. It features a 12-point box end with a 15-degree offset angle, giving techs improved clearance in tight or obstructed fastener locations. The open end and box end share the same 7\/8 inch drive size, making it a single-tool solution for the most common fastener dimensions found in equipment installation and service. At 8 inches overall length and 0.54 pounds, the J1228S is easy to carry and maneuver in confined spaces. The polished steel finish is corrosion resistant and meets ASME B107.100-2010 standards. A lifetime warranty backs the tool against defects.\u003c\/p\u003e\n\u003cp\u003eThe J1228S is suited for residential and commercial service work where access to fasteners is restricted by adjacent components, panels, or structure. The 15-degree offset box end allows the handle to clear surfaces that a flat wrench cannot. The straight handle and compact profile make it practical for equipment rooms, rooftop units, mechanical chases, and panel work. It is tether capable, supporting use in elevated work environments where dropped-tool protocols are required. It is not rated non-sparking, magnetic, or ratcheting.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e7\/8 inch combination wrench with 12-point box end for secure fastener engagement\u003c\/li\u003e\n  \u003cli\u003e15-degree offset angle on the box end for improved clearance in confined spaces\u003c\/li\u003e\n  \u003cli\u003ePolished steel construction with corrosion-resistant finish\u003c\/li\u003e\n  \u003cli\u003eTether capable design supports dropped-object prevention programs\u003c\/li\u003e\n  \u003cli\u003eMeets ASME B107.100-2010 standard\u003c\/li\u003e\n  \u003cli\u003eBacked by a lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style hand tool for use with standard 7\/8 inch fasteners across HVAC, plumbing, electrical, and general mechanical service applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall and remove fasteners by hand tool professionals following applicable trade safety protocols. Ensure the correct wrench size is fully seated on the fastener before applying torque to avoid rounding. This wrench is not rated for non-sparking environments; use an appropriate non-sparking tool where that requirement applies. Tether the wrench to an anchor point when working at height in accordance with your site dropped-object prevention program.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Size\u003c\/strong\u003e: 7\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Offset Angle\u003c\/strong\u003e: 15 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Points\u003c\/strong\u003e: 12\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Thickness\u003c\/strong\u003e: 9\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandle Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Polished\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorrosion Resistant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTether Capable\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-Sparking\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRatcheting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.54 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 8 inches L x 1.84 inches W x 0.55 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASME B107.100-2010\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PROTO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: J1228S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PROTO","offers":[{"title":"Default Title","offer_id":51540532887858,"sku":"J1228S","price":51.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/cbd40ecbf3227e61a16220b59ce42ac5.jpg?v=1785857670","url":"https:\/\/voomisupply.com\/products\/proto-j1228s-combination-wrench-7-8-inch-15-deg-offset","provider":"Voomi Supply","version":"1.0","type":"link"}