{"product_id":"proto-j1228hasd-combination-wrench-7-8-inch-satin","title":"Proto J1228HASD Combination Wrench 7\/8 Inch Satin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PROTO J1228HASD is a 7\/8 inch combination wrench built for professional trade use in demanding service environments. It features a 12 point box end on one side and an open end on the other, with a 15 degree offset angle that helps clear obstructions in tight work areas. The wrench is machined from steel with a corrosion-resistant satin finish and measures 12.5 inches overall length. It weighs 0.77 pounds, keeping it manageable for extended use. Licensed trades including HVAC technicians, plumbers, electricians, and pipefitters rely on this type of hand tool for routine fastener work across mechanical and utility systems.\u003c\/p\u003e\n\u003cp\u003eThis wrench suits a wide range of residential and commercial trade applications where 7\/8 inch fasteners are common, including equipment mounting, piping connections, valve packing nuts, and electrical panel hardware. The tether-capable design makes it appropriate for elevated work environments where dropped-tool hazards must be controlled, such as rooftop HVAC units, elevated platforms, or commercial mechanical rooms. The straight handle provides consistent torque transfer without the bulk of offset-handle designs.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e7\/8 inch head size fits standard SAE fasteners used across HVAC, plumbing, and electrical trade work\u003c\/li\u003e\n  \u003cli\u003e15 degree head offset angle improves clearance in confined or obstructed fastener locations\u003c\/li\u003e\n  \u003cli\u003e6-point box end reduces fastener rounding under high torque compared to 12-point designs\u003c\/li\u003e\n  \u003cli\u003eTether-capable design supports compliance with dropped-object prevention requirements at height\u003c\/li\u003e\n  \u003cli\u003eCorrosion-resistant satin finish resists rust in wet or outdoor service environments\u003c\/li\u003e\n  \u003cli\u003eBacked by a lifetime warranty per manufacturer standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose SAE combination wrench for professional trade use wherever 7\/8 inch fasteners are encountered. Meets standards B107.6 and GGG-W-636E.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis wrench is a hand tool requiring no installation, but proper use guidance applies. Always confirm the correct jaw size before applying torque to avoid fastener rounding. When working near energized equipment, verify the tool is appropriate for the voltage environment, as this wrench is not rated non-sparking. Attach an approved tether lanyard when working at elevation to satisfy site dropped-object requirements.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Size\u003c\/strong\u003e: 7\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 12.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Offset Angle\u003c\/strong\u003e: 15 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Thickness\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Points\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Satin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandle Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTether Style\u003c\/strong\u003e: Tether Capable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-Sparking\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRatcheting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMagnetic\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorrosion Resistant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.77 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: B107.6, GGG-W-636E\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PROTO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: J1228HASD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PROTO","offers":[{"title":"Default Title","offer_id":51538470469938,"sku":"J1228HASD","price":50.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f0478d13a266d38862c37164b558e831.jpg?v=1785824770","url":"https:\/\/voomisupply.com\/products\/proto-j1228hasd-combination-wrench-7-8-inch-satin","provider":"Voomi Supply","version":"1.0","type":"link"}