{"product_id":"proto-j1222spl-combination-wrench-11-16-inch-12-point","title":"Proto J1222SPL Combination Wrench 11\/16 Inch 12-point","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PROTO J1222SPL is a 12-point combination wrench sized at 11\/16 inch, built for professional use in mechanical, HVAC, and industrial service environments. The open end delivers fast bolt engagement while the box end provides a full 360-degree grip on fastener heads. A 15-degree offset on the box end gives clearance over obstructed or recessed fasteners without sacrificing torque transfer. Constructed from steel with a chrome finish that resists corrosion, this wrench meets SAE AS4984A and MIL-W-8982\/6 standards, reflecting a military and aerospace-grade specification lineage. The tether-capable design supports use in elevated or safety-critical work areas where dropped tools are a hazard.\u003c\/p\u003e\n\u003cp\u003eThis wrench is suited for mechanical contractors, HVAC technicians, and industrial maintenance professionals working on equipment fasteners in the 11\/16 inch SAE range. The straight handle and 15-degree box-end offset make it practical for tight-clearance applications such as equipment panels, compressor hardware, and structural mechanical connections. The chrome finish simplifies cleaning in shop and field environments. It is appropriate for both routine service and installations requiring compliance with military or aerospace tool specifications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e12-point box end for maximum contact on fastener flats, reducing rounding risk\u003c\/li\u003e\n  \u003cli\u003e15-degree offset angle provides clearance over raised surfaces and obstructions\u003c\/li\u003e\n  \u003cli\u003eSteel construction with corrosion-resistant chrome finish\u003c\/li\u003e\n  \u003cli\u003eTether-capable design for use in elevated or safety-critical work environments\u003c\/li\u003e\n  \u003cli\u003eMeets SAE AS4984A and MIL-W-8982\/6 standards\u003c\/li\u003e\n  \u003cli\u003eLifetime warranty coverage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard SAE combination wrench for use with 11\/16 inch fasteners across residential, commercial, and industrial mechanical applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis wrench is installed and used by licensed mechanical contractors, HVAC technicians, and maintenance professionals. Always ensure the wrench is fully seated on the fastener before applying torque to prevent slippage or fastener damage. When working in elevated areas or near energized equipment, attach an approved tether lanyard to the tether point to prevent dropped-tool incidents. Inspect the wrench before each use and remove from service if cracking, deformation, or finish degradation is observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Size\u003c\/strong\u003e: 11\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Points\u003c\/strong\u003e: 12\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Offset Angle\u003c\/strong\u003e: 15 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Thickness\u003c\/strong\u003e: 7\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 10.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandle Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Chrome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorrosion Resistant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTether Style\u003c\/strong\u003e: Tether Capable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRatcheting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-Sparking\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.43 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 10.3 inches L x 1.4 inches W x 0.4 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE AS4984A, MIL-W-8982\/6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PROTO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: J1222SPL\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PROTO","offers":[{"title":"Default Title","offer_id":51538633163058,"sku":"J1222SPL","price":46.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ff8d92dc6a84969e29ad26fcb281dd04.jpg?v=1785825370","url":"https:\/\/voomisupply.com\/products\/proto-j1222spl-combination-wrench-11-16-inch-12-point","provider":"Voomi Supply","version":"1.0","type":"link"}