{"product_id":"pro-source-pro10412-pleated-air-filter-18x18x1-merv-8","title":"Pro-source PRO10412 Pleated Air Filter 18x18x1 Merv 8","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRO-SOURCE PRO10412 is a MERV 8 pleated air filter rated for residential and light commercial HVAC applications. It measures 18 x 18 x 1 inches nominal (17-3\/4 x 17-3\/4 x 3\/4 inches actual) and uses a wire-backed synthetic media construction supported by a paperboard frame. At a rated airflow of 675 CFM and a maximum face velocity of 300 FPM, it delivers 35% particle capture efficiency with an initial resistance of 0.14 inches water gauge. HVAC technicians and service professionals install this filter as a routine replacement in forced-air heating and cooling systems.\u003c\/p\u003e\n\u003cp\u003eThis filter fits standard 18 x 18 x 1 inch filter slots found in a wide range of residential and light commercial air handlers, furnaces, and fan coil units. The manufacturer lists it as compatible with any unit accepting this nominal size. It is suited for environments where baseline particulate control is needed without imposing excessive static pressure on the system. It meets ASHRAE 52.2-2012 standards and carries UL 900 certification, making it appropriate for code-conscious installations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMERV 8 rating with 35% particle capture efficiency per ASHRAE 52.2-2012\u003c\/li\u003e\n  \u003cli\u003eWire-backed pleated synthetic media maintains pleat geometry under airflow\u003c\/li\u003e\n  \u003cli\u003ePaperboard frame provides structural support and a consistent seal in the filter rack\u003c\/li\u003e\n  \u003cli\u003e675 CFM rated airflow at a maximum face velocity of 300 FPM\u003c\/li\u003e\n  \u003cli\u003eLow initial resistance of 0.14 inches water gauge at 300 FPM reduces blower strain\u003c\/li\u003e\n  \u003cli\u003eRated to 200 degrees F maximum operating temperature\u003c\/li\u003e\n  \u003cli\u003eUL 900 listed and ASHRAE 52.2-2012 compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement for any forced-air HVAC unit accepting an 18 x 18 x 1 inch nominal filter. The manufacturer designates this filter for use with any unit of that size.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eFilter replacement is a routine HVAC maintenance task performed by licensed technicians or qualified service personnel. Set the system to off at the thermostat and confirm the blower has stopped before removing the old filter. Install the new filter with the airflow direction arrow on the frame pointing toward the blower. Inspect the filter rack for gaps that would allow bypass air to circumvent the media.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMERV Rating\u003c\/strong\u003e: 8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eParticle Capture Efficiency\u003c\/strong\u003e: 35%\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRated Airflow\u003c\/strong\u003e: 675 CFM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Face Velocity\u003c\/strong\u003e: 300 FPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInitial Resistance\u003c\/strong\u003e: 0.14 inches water gauge at 300 FPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinal Resistance\u003c\/strong\u003e: 1.0 inches water gauge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNominal Dimensions\u003c\/strong\u003e: 18 x 18 x 1 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eActual Dimensions\u003c\/strong\u003e: 17-3\/4 x 17-3\/4 x 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMedia Material\u003c\/strong\u003e: Synthetic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrame Material\u003c\/strong\u003e: Paperboard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Temperature\u003c\/strong\u003e: 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASHRAE 52.2-2012, UL 900\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRO-SOURCE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PRO10412\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRO-SOURCE","offers":[{"title":"Default Title","offer_id":51736149328178,"sku":"PRO10412","price":120.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e0c239e19b99227890e096e6d86b958b.jpg?v=1788776166","url":"https:\/\/voomisupply.com\/products\/pro-source-pro10412-pleated-air-filter-18x18x1-merv-8","provider":"Voomi Supply","version":"1.0","type":"link"}