{"product_id":"pro-source-gp-0303-3-jaw-gear-puller-4-in-2-ton","title":"Pro-source GP-0303 3-jaw Gear Puller 4 in 2 Ton","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe PRO-SOURCE GP-0303 is a standard 3-jaw gear puller designed for removing gears, pulleys, bearings, and similar pressed-on components from shafts. It handles a load capacity of 2 tons and spans a maximum spread of 4 inches, making it effective on a wide range of component diameters. The reach extends to 2.5 inches, allowing it to grip behind components with adequate depth. At an overall length of 5.109 inches, the tool is compact enough for tight service bays. Mechanics, machinists, and general maintenance technicians reach for this tool when a hydraulic press is impractical or unavailable.\u003c\/p\u003e\u003cp\u003eThe GP-0303 is suited for both shop and field applications where gears or hubs must be removed from motor shafts, pump shafts, or gearbox assemblies. The 3-jaw configuration distributes pulling force evenly around the component, reducing the risk of cocking or damage during extraction. Minimum spread is 1.6 inches, so it works on smaller-diameter components as well as larger ones up to 4 inches across. It is appropriate for light industrial, automotive, and general mechanical maintenance tasks.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3-jaw design for balanced, even load distribution during extraction\u003c\/li\u003e\n\u003cli\u003eMaximum spread of 4 inches accommodates a broad range of gear and pulley diameters\u003c\/li\u003e\n\u003cli\u003e2-ton load capacity handles firmly pressed components\u003c\/li\u003e\n\u003cli\u003e2.5-inch reach provides adequate jaw depth behind the component\u003c\/li\u003e\n\u003cli\u003eCenter bolt diameter of 0.4 inches with a 4.9-inch center bolt length for stable driving force\u003c\/li\u003e\n\u003cli\u003eCompact overall length of 5.109 inches suits confined work areas\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement and general-purpose standard gear puller for use on gears and similar pressed-on shaft components in light industrial and maintenance applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eEnsure the shaft and surrounding area are clean and free of burrs before seating the jaws. Position all three jaws evenly behind the component face before applying torque to the center bolt. Wear appropriate eye protection, as components under load can release suddenly. If the component does not move after reasonable force is applied, inspect for set screws, retaining rings, or other fasteners before continuing.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Type\u003c\/strong\u003e: Standard Gear Puller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Jaws\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Spread\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Spread\u003c\/strong\u003e: 1.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Capacity\u003c\/strong\u003e: 2 tons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.109 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Bolt Diameter\u003c\/strong\u003e: 0.4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Bolt Length\u003c\/strong\u003e: 4.9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 5.12 inches L x 3.74 inches W x 3.74 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.76 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27113100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRO-SOURCE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: GP-0303\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRO-SOURCE","offers":[{"title":"Default Title","offer_id":51751488258354,"sku":"GP-0303","price":46.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e798cceb795667d97f8aa460580fb3f4.jpg?v=1788923602","url":"https:\/\/voomisupply.com\/products\/pro-source-gp-0303-3-jaw-gear-puller-4-in-2-ton","provider":"Voomi Supply","version":"1.0","type":"link"}