{"product_id":"pro-source-ced3190mk-wall-mount-fan-1-3-hp-7500-cfm","title":"Pro-source CED3190MK Wall-mount Fan 1\/3 Hp 7500 Cfm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRO-SOURCE CED3190MK is a direct-drive, wall-mount circulation fan rated at 1\/3 horsepower and up to 7,500 CFM maximum airflow. Built around a 30-inch blade, it runs on 120 volts single-phase power and draws 2.1 amps at full load. Three selectable speeds give technicians and facilities personnel control over airflow output to match ventilation demands. At 29.7 pounds, the unit is substantial enough for permanent installation in industrial, agricultural, or commercial spaces where sustained air movement is required. Licensed HVAC technicians and facilities maintenance crews are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis fan is suited for wall-mounted ventilation applications in spaces such as warehouses, garages, barns, shops, and equipment rooms where continuous airflow or spot cooling is needed. The direct-drive design eliminates belt maintenance and reduces long-term service requirements. The three-speed selector allows the operator to dial back airflow during low-demand periods, reducing noise and energy draw without removing the unit from service. The 30-inch blade diameter provides broad air coverage across open floor plans or large bays.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/3 HP direct-drive motor  -  no belts or pulleys to service\u003c\/li\u003e\n  \u003cli\u003eUp to 7,500 CFM maximum airflow capacity\u003c\/li\u003e\n  \u003cli\u003eThree operating speeds for variable ventilation control\u003c\/li\u003e\n  \u003cli\u003e30-inch blade diameter for wide-area air coverage\u003c\/li\u003e\n  \u003cli\u003e120 volt single-phase power  -  standard wall circuit compatible\u003c\/li\u003e\n  \u003cli\u003e2.1 amp draw supports installation on common branch circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a wall-mount ventilation fan for residential, agricultural, and light commercial applications requiring direct-drive, single-phase airflow equipment with a 30-inch blade.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified electrician or licensed HVAC technician in accordance with NEC requirements for the applicable circuit rating. Disconnect and lock out all power at the breaker before mounting or wiring the unit. The wall structure must be capable of supporting a mounted load of approximately 29.7 pounds plus dynamic operating loads. Verify that the selected mounting height and blade clearance meet local code requirements before energizing.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlade Diameter\u003c\/strong\u003e: 30 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMotor Horsepower\u003c\/strong\u003e: 1\/3 HP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Airflow\u003c\/strong\u003e: 7,500 CFM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e: 120 volts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmperage\u003c\/strong\u003e: 2.1 amps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Speeds\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePhase\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrive Type\u003c\/strong\u003e: Direct\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 31.8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 31.8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDepth\u003c\/strong\u003e: 11.8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 29.7 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRO-SOURCE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: CED3190MK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRO-SOURCE","offers":[{"title":"Default Title","offer_id":51739678310706,"sku":"CED3190MK","price":167.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5b567aa2ada9e1d563cc61b48605f718.jpg?v=1788817670","url":"https:\/\/voomisupply.com\/products\/pro-source-ced3190mk-wall-mount-fan-1-3-hp-7500-cfm","provider":"Voomi Supply","version":"1.0","type":"link"}