{"product_id":"pro-safe-ps-sa-ln18-shock-absorbing-lanyard-350-lb","title":"Pro-safe PS-SA-LN18 Shock Absorbing Lanyard 350 Lb","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRO-SAFE PS-SA-LN18 is a two-leg shock absorbing lanyard designed for fall protection applications in general industry and construction environments. Built from polyester webbing and rated to 350 pounds load capacity, it extends 6 feet in length and connects to an anchor point via a locking rebar snap hook. The harness end uses locking snap hooks on both legs. An integrated shock absorber deploys on sudden load, reducing the force transmitted to the worker during a fall arrest event. Licensed safety professionals and competent persons in fall protection install and inspect this lanyard as part of a complete personal fall arrest system.\u003c\/p\u003e\n\u003cp\u003eThe PS-SA-LN18 is suited for residential and commercial construction, steel erection, roofing, and maintenance work at elevation where a two-leg configuration provides continuous 100 percent tie-off capability. The locking rebar snap hook on the anchorage end is compatible with rebar, structural members, and other anchorage connectors that meet minimum strength requirements. This lanyard is not rated for arc flash work. Yellow webbing provides high visibility for quick visual inspection before each use.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e350-pound load capacity for fall arrest applications\u003c\/li\u003e\n  \u003cli\u003e6-foot overall length allows standard working range below anchor point\u003c\/li\u003e\n  \u003cli\u003eTwo-leg design enables 100 percent tie-off during travel between anchor points\u003c\/li\u003e\n  \u003cli\u003eIntegrated shock absorber reduces fall arrest forces transmitted to the harness\u003c\/li\u003e\n  \u003cli\u003eLocking rebar snap hook on anchorage end resists rollout and accidental gate opening\u003c\/li\u003e\n  \u003cli\u003ePolyester webbing construction resists UV degradation and moisture\u003c\/li\u003e\n  \u003cli\u003eHigh-visibility yellow color simplifies pre-use inspection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with full-body harnesses featuring D-ring harness connection points in residential and commercial fall protection systems meeting OSHA 1926.502 and ANSI Z359 requirements. Not intended for arc flash work environments.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and inspection must be performed by a competent person trained in fall protection per applicable OSHA and ANSI Z359 standards. Shut down or isolate all hazardous energy sources before beginning work at elevation. Inspect the lanyard, shock absorber pack, and all hardware for damage, wear, or contamination before each use — remove from service immediately if any defect is found or if the shock absorber has deployed. Anchorage points must be capable of supporting at least 5,000 pounds per attached worker or be designed by a qualified person.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Capacity\u003c\/strong\u003e: 350 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 6 feet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Legs\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Shock Absorbing Lanyard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnchorage End Connection\u003c\/strong\u003e: Locking Rebar Snap Hook\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHarness Connection\u003c\/strong\u003e: Locking Snap Hook\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Polyester Webbing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Yellow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArc Flash Rated\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 12 inches L x 10 inches W x 6 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 46182300\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRO-SAFE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PS-SA-LN18\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRO-SAFE","offers":[{"title":"Default Title","offer_id":51748245373234,"sku":"PS-SA-LN18","price":164.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/23a51e150c900b06175e7bd43f20446b.jpg?v=1788891001","url":"https:\/\/voomisupply.com\/products\/pro-safe-ps-sa-ln18-shock-absorbing-lanyard-350-lb","provider":"Voomi Supply","version":"1.0","type":"link"}