{"product_id":"precision-twist-drill-6001460-taper-length-drill-bit","title":"Precision Twist Drill 6001460 Taper Length Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRECISION TWIST DRILL 6001460 is a taper length drill bit designed for general-purpose drilling across a wide range of materials. Built from high speed steel with a bright\/uncoated finish, it features a 118-degree standard point angle and a web-thinned, tapered web configuration that reduces thrust and improves chip evacuation. The straight shank measures 0.3346 inches in diameter, and the overall length is 6.5 inches. The spiral flute length runs 4.28 inches, yielding a 6xD flute-to-diameter ratio that suits deeper hole applications where a jobber-length bit falls short. Licensed machinists, tool-and-die shops, and maintenance trades install this bit in standard drill presses, CNC machines, and hand drills.\u003c\/p\u003e\n\u003cp\u003eThe 6001460 suits drilling operations in metals, plastics, and composites where a longer reach than a jobber bit is required without stepping up to a full extra-length drill. Rated for right-hand cut with a regular spiral, it performs in alloy steel, carbon steel, stainless steel, cast iron, malleable iron, aluminum, aluminum alloy, brass, bronze, high strength bronze, copper, magnesium, magnesium alloy, nickel, nickel alloy, reinforced plastic materials, graphite, cermet, and hardened steel. The Series 5ATL designation follows DIN 340 standards, making it a recognized specification in both domestic and international machining environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh speed steel construction provides hardness and wear resistance across general-purpose materials\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web reduces cutting thrust\u003c\/li\u003e\n  \u003cli\u003e6xD flute-to-diameter ratio allows drilling deeper holes than standard jobber-length bits\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish maintains dimensional accuracy and suits applications where coatings are not required\u003c\/li\u003e\n  \u003cli\u003eRight-hand spiral flute promotes efficient chip removal and smooth bore finish\u003c\/li\u003e\n  \u003cli\u003eMeets DIN 340 specification for consistent geometry and interchangeability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose taper length drill bit conforming to DIN 340 specifications, suitable for use in standard drill chucks and CNC tool holders accepting a 0.3346-inch straight shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall in a drill press, CNC spindle, or hand drill with a chuck rated for the 0.3346-inch straight shank diameter. Secure the shank fully in the chuck and verify concentricity before beginning the cut. Use appropriate cutting fluid or coolant for the workpiece material, as dry cutting in ferrous metals will accelerate edge wear. Inspect the cutting edges before each use and resharpen or replace the bit if chipping or dulling is observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.3346 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 4.28 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute-to-Diameter Ratio\u003c\/strong\u003e: 6xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.3346 inches (8.50 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: DIN 340\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 5ATL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.083 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6001460\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51696321855794,"sku":"6001460","price":29.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f0f9484b2a04295739b7901eaa567b4a_fe970447-08cd-490c-ad04-c3463be44b1f.jpg?v=1788341468","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-6001460-taper-length-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}