{"product_id":"precision-twist-drill-6001304-taper-shank-drill-bit","title":"Precision Twist Drill 6001304 Taper Shank Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe PRECISION TWIST DRILL 6001304 is a taper shank drill bit engineered for general-purpose drilling in metal and hard materials. Built from high speed steel with an oxide finish, it accepts a 1MT (Morse Taper 1) shank for use in drill presses and lathes equipped with a matching taper socket. The bit measures 0.3346 inches (8.50 mm) in diameter with a 118-degree standard point angle and a web-thinned tip that reduces entry force on tough workpieces. The spiral flute runs 2.9528 inches, giving adequate chip clearance through the cut. Overall length is 6.1417 inches. Right-hand cutting direction. Series 5ATS, conforming to DIN 345.\u003c\/p\u003e\u003cp\u003eThis bit suits production and maintenance shops where a 1MT taper drive is standard equipment. Typical applications include drilling through mild steel, cast iron, aluminum, and similar materials on drill presses, milling machines with taper adapters, and engine lathes. The 4xD flute-length-to-diameter ratio supports moderate-depth holes without excessive deflection. General-purpose performance rating makes it appropriate for a wide range of trade and industrial drilling tasks rather than specialized high-speed or hard-material operations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHigh speed steel construction with oxide finish for corrosion resistance and reduced friction\u003c\/li\u003e\n\u003cli\u003e1MT Morse Taper shank fits standard drill press and lathe spindles with 1MT sockets\u003c\/li\u003e\n\u003cli\u003e118-degree standard point angle with web-thinned tip for reduced thrust on entry\u003c\/li\u003e\n\u003cli\u003e2.9528-inch spiral flute length supports efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting, regular spiral, DIN 345 standard\u003c\/li\u003e\n\u003cli\u003eNo coolant-through passages — suitable for conventional flood or dry cutting setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in drill presses, lathes, and milling machines equipped with a 1MT (Morse Taper 1) spindle or adapter socket. Conforms to DIN 345 dimensional standards.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use should be performed by a qualified machinist or tooling technician. Power down and de-energize the machine spindle completely before inserting or removing the taper shank. Clean both the shank and the spindle socket of chips and oil before seating to ensure full taper contact; a loose or contaminated taper can cause the bit to spin or eject under load. Use a drift and knockout bar to remove the bit safely — never strike the chuck or spindle housing directly.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.3346 inches (8.50 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Taper\u003c\/strong\u003e: 1MT (Morse Taper 1)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.9528 inches (75.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.1417 inches (156.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 5ATS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: DIN 345\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6001304\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51712033587506,"sku":"6001304","price":49.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c66615d6cdb2f4782e1917bc36ed0265_f7604a29-947d-4751-8b0b-42ec6c83278d.jpg?v=1788482903","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-6001304-taper-shank-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}