{"product_id":"precision-twist-drill-6001134-aircraft-drill-7-32-in-hss","title":"Precision Twist Drill 6001134 Aircraft Drill 7\/32 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRECISION TWIST DRILL 6001134 is a 7\/32 inch (0.2188 inch) diameter aircraft extension drill bit engineered for deep-reach drilling in metal fabrication, aerospace maintenance, and structural applications. Built from high speed steel with an oxide finish, this bit features a 135-degree split point that self-centers on contact, eliminating the need for a center punch on most metal surfaces. The extended 12 inch overall length with a 2.5 inch spiral flute gives technicians access to fastener holes in confined or recessed areas that standard-length bits cannot reach. The right-hand cutting direction and two-flute spiral geometry promote efficient chip evacuation during drilling operations.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for use in aircraft maintenance, structural steel work, HVAC equipment fabrication, and general metalworking where standard drill bit reach is insufficient. The straight-cylindrical shank accepts standard drill chucks without any adapter. The Series 500-12 designation indicates a 4xD flute-to-diameter ratio designed for general-purpose metal drilling. Machinists, aircraft mechanics, and sheet metal workers are the primary installers and users of this bit in production and field service environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e135-degree split point self-centers on contact, reducing walking on hard metal surfaces\u003c\/li\u003e\n  \u003cli\u003e12 inch overall length provides extended reach into deep or confined cavities\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction withstands heat generated during metal drilling\u003c\/li\u003e\n  \u003cli\u003eOxide finish improves lubricity and helps resist corrosion during storage\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned tapered web reduces thrust required for penetration\u003c\/li\u003e\n  \u003cli\u003eMeets NAS 907 Type B standards for aircraft-quality drill bits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style general-purpose aircraft extension drill bit compatible with any standard drill chuck accepting a straight-cylindrical shank at 7\/32 inch diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit is installed and operated by machinists, aircraft mechanics, or sheet metal workers using standard electric or pneumatic drills with a compatible chuck. Secure the workpiece firmly before drilling and use appropriate cutting fluid when drilling steel to extend bit life. Follow applicable workplace safety standards and wear eye protection. Inspect the bit for cracks or excessive wear before each use and replace if the cutting edges are chipped or dull.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 7\/32 inch (0.2188 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 7\/32 inch (0.2188 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSelf-Centering\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 500-12\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: NAS 907 Type B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.083 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6001134\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51698615157042,"sku":"6001134","price":28.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/00c62afe4afb4c768fcc83692ac48d80_28b671a6-d39c-46b2-a0e7-24d62026562b.jpg?v=1788365482","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-6001134-aircraft-drill-7-32-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}