{"product_id":"precision-twist-drill-6001045-taper-shank-drill-bit-2mt","title":"Precision Twist Drill 6001045 Taper Shank Drill Bit 2MT","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe PRECISION TWIST DRILL 6001045 is a taper shank drill bit designed for general-purpose drilling in metal, wood, and composite materials. It carries a 2MT (Morse Taper 2) shank for use in taper-socket spindles found on drill presses, lathes, and milling machines. The bit is ground from high speed steel (HSS) with an oxide finish to reduce friction and extend tool life under moderate heat. The 118-degree standard point angle and web-thinned tip lower entry resistance and reduce the force needed to start a hole. At 9.5625 inches overall length with a 5.7188-inch spiral flute, it handles deeper through-holes without step drilling.\u003c\/p\u003e\u003cp\u003eThis bit is suited for machine shop, maintenance, and fabrication environments where taper-socket spindles are standard. It excels in drilling ferrous and non-ferrous metals at moderate feed and speed rates. The right-hand spiral flute evacuates chips efficiently in through-hole and blind-hole applications. Machinists, tool-and-die tradespeople, and industrial maintenance technicians are the primary users. It conforms to DIN 345, making it dimensionally interchangeable with other DIN 345-compliant 2MT drill bits in the same diameter range.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.8071 inch (20.50 mm) cutting diameter for precision hole sizing\u003c\/li\u003e\n\u003cli\u003eMorse Taper 2 (2MT) shank seats directly in taper-socket spindles without a chuck\u003c\/li\u003e\n\u003cli\u003e118-degree standard point with web thinning for reduced thrust and easier starting\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction handles moderate heat and repeated use\u003c\/li\u003e\n\u003cli\u003eOxide finish reduces friction and provides light corrosion resistance\u003c\/li\u003e\n\u003cli\u003eRight-hand spiral flute with regular helix promotes consistent chip evacuation\u003c\/li\u003e\n\u003cli\u003eConforms to DIN 345 for dimensional interchangeability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in drill press, lathe, or milling machine spindles with a Morse Taper 2 socket. Dimensionally compatible with DIN 345-standard 2MT taper shank tooling setups.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by machinists or maintenance technicians familiar with taper-shank tooling. Power down and lock out the machine before seating or removing the bit. Clean both the taper shank and the spindle socket before insertion to ensure full taper engagement and prevent runout. Use a drift key and drift slot to remove the bit safely — never strike the bit directly.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.8071 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (mm)\u003c\/strong\u003e: 20.50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Taper Designation\u003c\/strong\u003e: 2MT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 9.5625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 5.7188 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 5ATS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: DIN 345\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6001045\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51707928150322,"sku":"6001045","price":139.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c66615d6cdb2f4782e1917bc36ed0265_91ec60e1-6d57-4509-b195-91ca18d7a577.jpg?v=1788442998","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-6001045-taper-shank-drill-bit-2mt","provider":"Voomi Supply","version":"1.0","type":"link"}