{"product_id":"precision-twist-drill-6001020-taper-shank-drill-bit","title":"Precision Twist Drill 6001020 Taper Shank Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe PRECISION TWIST DRILL 6001020 is a taper shank drill bit engineered for general-purpose drilling in metal, cast iron, and similar materials. It carries a 2MT (Morse Taper 2) shank for direct mounting in compatible drill presses, lathes, and milling machines without a separate chuck. The bit is ground from high speed steel with an oxide finish that provides light lubricity and corrosion resistance. At 0.689 inches (17.50 mm) in diameter and 9 inches overall length, it covers medium-to-large hole applications where rigidity and accurate sizing are required. The 118-degree standard point angle suits a broad range of ferrous and non-ferrous workpieces.\u003c\/p\u003e\u003cp\u003eThis drill bit is suited for machine shop, maintenance, and fabrication environments where a Morse taper spindle is available. Typical applications include drilling through structural steel, plate, and similar stock on a drill press or lathe. The right-hand spiral flute and web-thinned point reduce thrust and improve chip evacuation, making it practical for production and job-shop use. It conforms to DIN 345 standards and belongs to the Series 5ATS line. No coolant-through capability is present, so conventional flood or mist cooling at the cutting zone is recommended for extended runs.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e2MT Morse taper shank for secure, direct mounting in taper-spindle machines\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction with oxide finish for general-purpose durability\u003c\/li\u003e\n\u003cli\u003e118-degree standard point angle with web-thinned geometry to reduce entry thrust\u003c\/li\u003e\n\u003cli\u003eRight-hand regular spiral flute, 5.09 inches flute length for efficient chip clearing\u003c\/li\u003e\n\u003cli\u003eConforms to DIN 345 standards\u003c\/li\u003e\n\u003cli\u003eNo coolant-through passages — use external cooling for heat management\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in drill presses, lathes, and milling machines equipped with a No. 2 Morse Taper (2MT) spindle or tailstock. A 2MT drill sleeve or socket may be used to adapt to larger taper spindles.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation requires a machine spindle or tailstock with a No. 2 Morse Taper bore; ensure the taper surfaces are clean and free of burrs before seating the shank. Power down and lock out the machine before inserting or removing the bit. Use a drift key through the spindle slot to eject the bit — never strike the shank directly. A licensed machinist or qualified tradesperson should verify spindle speed and feed rate are appropriate for the workpiece material and bit diameter before drilling.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter (Decimal Inch)\u003c\/strong\u003e: 0.689 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter (mm)\u003c\/strong\u003e: 17.50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Taper Designation\u003c\/strong\u003e: 2MT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 9 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 5.09 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 5ATS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: DIN 345\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6001020\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51694243971378,"sku":"6001020","price":89.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c66615d6cdb2f4782e1917bc36ed0265_aca834b7-1423-4edb-85b6-e66ac1bb7a00.jpg?v=1788322129","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-6001020-taper-shank-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}