{"product_id":"precision-twist-drill-6000926-taper-length-drill-bit","title":"Precision Twist Drill 6000926 Taper Length Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRECISION TWIST DRILL 6000926 is a taper length drill bit designed for general-purpose drilling across a wide range of materials. It measures 0.1260 inches in diameter with a 118-degree standard point angle and is manufactured from high speed steel with a bright, uncoated finish. The spiral flute geometry and web-thinned, tapered web configuration promote efficient chip evacuation and reduce entry force. The straight shank measures 0.1260 inches in diameter and 37.00 millimeters in length. At 4-3\/16 inches overall length, this bit provides extended reach compared to jobber-length equivalents. Licensed machinists, millwrights, pipefitters, and HVAC fabricators use this bit when standard-length drills lack the reach for deep-hole applications in tight assemblies.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for drilling through alloy steel, carbon steel, stainless steel, cast iron, malleable iron, aluminum, aluminum alloy, brass, bronze, high strength bronze, copper, magnesium, magnesium alloy, nickel, nickel alloy, cermet, graphite, and reinforced plastic materials. It is classified as a general-purpose tool and fits the Series 5ATL family from PRECISION TWIST DRILL. Typical applications include fabrication shops, mechanical contracting, HVAC sheet metal work, and plumbing rough-in where access depth exceeds the reach of standard jobber bits.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.1260 inch diameter with 118-degree standard point angle for clean entry on a broad range of workpiece materials\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction provides hardness and wear resistance for production and intermittent drilling\u003c\/li\u003e\n  \u003cli\u003eTaper length body at 4-3\/16 inches overall gives extended reach beyond jobber-length bits\u003c\/li\u003e\n  \u003cli\u003e2-23\/32 inch flute length at a 6xD flute-to-diameter ratio supports effective chip clearing in deeper holes\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned, tapered web reduces thrust force and improves point stability\u003c\/li\u003e\n  \u003cli\u003eRight-hand spiral flute, straight shank, no coolant-through — compatible with standard drill chucks and benchtop drill presses\u003c\/li\u003e\n  \u003cli\u003eMeets DIN 340 specification for taper length drill bits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose taper length drill bit conforming to DIN 340, compatible with any standard drill chuck accepting a 0.1260 inch straight shank. Suitable for use in hand drills, drill presses, and milling machine setups.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the straight shank firmly in a properly sized drill chuck before operation and verify zero runout where tolerances are critical. Always power down and lock out the machine before changing bits. Use appropriate cutting fluid or coolant when drilling hardened steel, stainless steel, or nickel alloys to extend tool life, even though this bit does not have internal coolant-through capability. Dispose of metal chips safely and inspect the cutting edges for wear before each use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.1260 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4-3\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2-23\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length to Diameter Ratio\u003c\/strong\u003e: 6xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter (Decimal Inch)\u003c\/strong\u003e: 0.1260 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3.20 millimeters\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 37.00 millimeters\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 5ATL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: DIN 340\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.042 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6000926\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51711515722034,"sku":"6000926","price":21.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f0f9484b2a04295739b7901eaa567b4a_ba3c9ba5-749e-4c83-b214-34717e5e097c.jpg?v=1788476778","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-6000926-taper-length-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}