{"product_id":"precision-twist-drill-6000670-hss-jobber-drill-bit-0-5118-in","title":"Precision Twist Drill 6000670 Hss Jobber Drill Bit 0.5118 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRECISION TWIST DRILL 6000670 is a high speed steel jobber-length drill bit designed for general-purpose drilling in a wide range of materials. It features a 0.5118-inch diameter with a standard 118-degree point angle and a bright, uncoated finish. The right-hand spiral flute geometry promotes efficient chip evacuation, and the web-thinned, tapered web configuration reduces thrust during entry. At 5.9449 inches overall length with a 3.9764-inch flute length, this bit suits standard drill press and handheld power tool applications. Licensed HVAC techs, plumbers, electricians, and general contractors reach for this type of bit when drilling sheet metal, aluminum, copper, plastic, and other non-ferrous substrates.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for drilling aluminum, non-ferrous metals, and similar materials in both residential and commercial trade applications. The straight cylindrical shank fits standard 3-jaw drill chucks without adapters. With a flute-to-diameter ratio of 8xD and a maximum drilling depth matching the flute length at 3.9764 inches, it handles typical through-hole and moderate depth drilling tasks. It conforms to DIN 338 and ANSI standards, making it a reliable choice for jobs where dimensional consistency is required. Sold individually.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.5118-inch (13.00 mm) diameter with matching straight cylindrical shank for secure chuck engagement\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for reduced entry thrust\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction provides hardness and heat resistance for general-purpose drilling\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish — no coating to chip or flake during use\u003c\/li\u003e\n  \u003cli\u003eRight-hand regular spiral flute promotes consistent chip clearing\u003c\/li\u003e\n  \u003cli\u003eMeets DIN 338 and ANSI standards; Series 2A designation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber drill bit compatible with aluminum, non-ferrous metals, and similar workpiece materials. Fits any standard drill press or handheld power tool chuck accepting a 0.5118-inch straight cylindrical shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall and remove drill bits only with the tool unpowered and the chuck key removed from the chuck. Secure the workpiece before drilling to prevent movement. Follow applicable ANSI safety standards and shop safety protocols when operating drill presses or handheld power tools. Coolant-through operation is not supported on this bit; use appropriate cutting fluid externally when drilling harder non-ferrous alloys if needed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.5118 inches (13.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.9449 inches (151.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3.9764 inches (101.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5118 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.9688 inches (50 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral, Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical, No Flats\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Aluminum and Non-Ferrous\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 3.9764 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 8xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: DIN 338, ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6000670\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51700765950258,"sku":"6000670","price":43.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e64fa5b842584bbfb6b1032bddd2a2c4_87efd17b-62c3-48fc-bb3e-57dfa77e9b91.jpg?v=1788394986","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-6000670-hss-jobber-drill-bit-0-5118-in","provider":"Voomi Supply","version":"1.0","type":"link"}