{"product_id":"precision-twist-drill-6000371-taper-length-drill-bit","title":"Precision Twist Drill 6000371 Taper Length Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRECISION TWIST DRILL 6000371 is a taper length drill bit designed for general-purpose hole drilling in a wide range of metallic and non-metallic materials. Ground from high speed steel (HSS) with a bright, uncoated finish, this bit measures 47\/64 inch (0.7344 inches) in diameter and carries a standard 118-degree point angle. The overall length is 9-3\/4 inches, with a spiral flute length of 5-7\/8 inches at a 6xD flute-to-diameter ratio. The web-thinned, tapered web configuration reduces thrust and improves chip evacuation. It is installed by machinists, maintenance mechanics, and metalworking tradespeople on drill presses, lathes, and hand-held power drills.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for production and maintenance drilling in shops, fabrication facilities, and field service environments. The straight shank at 0.7344 inches diameter seats directly into standard drill chucks without an adapter. The taper length body provides added reach compared to jobber-length bits, making it useful in applications where standard-length bits cannot access the workpiece. Compatible material applications include alloy steel, aluminum, aluminum alloy, brass, bronze, carbon steel, cast iron, copper, graphite, hardened steel, high strength bronze, magnesium, magnesium alloy, malleable iron, nickel, nickel alloy, reinforced plastic materials, and stainless steel.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e47\/64 inch (0.7344 inches) diameter with matching straight shank for direct chuck mounting\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for reduced entry thrust\u003c\/li\u003e\n  \u003cli\u003e5-7\/8 inch spiral flute length at a 6xD ratio for efficient chip removal\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction for durability across a broad range of workpiece materials\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish — compatible with cutting fluids as needed by application\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, regular spiral, ANSI-standard geometry — Series R51\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose taper length replacement or production drill bit suitable for use with standard drill chucks accepting a 47\/64 inch straight shank. Verified material applications include alloy steel, aluminum, brass, bronze, carbon steel, cast iron, copper, stainless steel, nickel alloys, magnesium alloys, and reinforced plastics.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or qualified mechanical tradesperson. Secure the straight shank fully in a keyed or keyless drill chuck before operation, and verify the chuck is tightened to prevent slippage under load. Always wear appropriate eye protection and follow applicable shop safety standards when operating drilling equipment. Reduce feed rate when breaking through the exit side of the workpiece to prevent bit walking or workpiece damage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 47\/64 inch (0.7344 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 9-3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 5-7\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute-to-Diameter Ratio\u003c\/strong\u003e: 6xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 47\/64 inch (0.7344 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: R51\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6000371\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51693467009330,"sku":"6000371","price":94.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f3f0b7920a9007113a94c0b5a52c577c.jpg?v=1788312812","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-6000371-taper-length-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}