{"product_id":"precision-twist-drill-6000251-taper-length-drill-bit-59-64","title":"Precision Twist Drill 6000251 Taper Length Drill Bit 59\/64","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRECISION TWIST DRILL 6000251 is a taper length, high speed steel drill bit designed for general-purpose drilling across a wide range of materials. It features a 118-degree standard point angle, a bright\/uncoated finish, and a right-hand spiral flute. At 59\/64 inch (0.9219 inches) in diameter with a flute length of 6-1\/8 inches and an overall length of 10-3\/4 inches, this bit provides extended reach compared to jobber-length drills while maintaining rigidity. The straight shank and web-thinned, tapered web configuration support efficient chip evacuation and reduced feed pressure during drilling operations.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for metalworking and fabrication applications in both shop and field environments. Its taper length body makes it a practical choice when standard jobber bits lack the reach needed for deeper holes. Rated for general-purpose use, it performs reliably in drilling operations involving alloy steel, carbon steel, stainless steel, cast iron, malleable iron, aluminum, aluminum alloy, brass, bronze, high strength bronze, copper, magnesium, magnesium alloy, nickel, nickel alloy, cermet, graphite, and reinforced plastic materials. Machinists, fabricators, and maintenance technicians are the typical end users.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e59\/64 inch (0.9219 inches) diameter with matching straight shank for secure chuck engagement\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for reduced entry force\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction rated for a broad range of ferrous and non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003e6-1\/8 inch spiral flute length at a 6xD ratio for effective chip clearance on deep holes\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish compatible with cutting fluids and coolants as needed\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, regular spiral — compatible with standard drill press and handheld drill chucks\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards; Series R51 general-purpose grade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose taper length drill bit for use in standard straight-shank drill chucks on drill presses, magnetic drills, and hand drills. Suitable for drilling alloy steel, aluminum, aluminum alloy, brass, bronze, carbon steel, cast iron, cermet, copper, graphite, hardened steel, high strength bronze, magnesium, magnesium alloy, malleable iron, nickel, nickel alloy, reinforced plastic materials, and stainless steel.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or maintenance technicians using a standard keyed or keyless drill chuck sized to accept a 59\/64 inch straight shank. Secure the shank fully into the chuck before operation and verify concentricity to avoid bit walk. Apply appropriate cutting fluid for the workpiece material, particularly when drilling stainless steel, nickel alloys, or hardened steel. Do not exceed the recommended feed rate or force the bit through hard material, as this can cause premature tip failure or bit breakage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 59\/64 inch (0.9219 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight, Non-Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 59\/64 inch (0.9219 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 6-1\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length x Diameter Ratio\u003c\/strong\u003e: 6xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 10-3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: R51\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6000251\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51695561867570,"sku":"6000251","price":138.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/137f19e836f319bdc92beca6d576821f_8c971e28-3d10-4ff7-82d6-5be713b06dfa.jpg?v=1788336472","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-6000251-taper-length-drill-bit-59-64","provider":"Voomi Supply","version":"1.0","type":"link"}