{"product_id":"precision-twist-drill-6000200-taper-length-drill-bit","title":"Precision Twist Drill 6000200 Taper Length Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRECISION TWIST DRILL 6000200 is a taper length high speed steel drill bit designed for general-purpose drilling across a wide range of materials. It carries a wire size designation of #53 and a decimal diameter of 0.0595 inches. The 118-degree standard point angle suits most common drilling applications. With a 3-inch overall length and a 1.75-inch spiral flute, this bit provides additional reach compared to jobber-length equivalents while maintaining rigidity. The web-thinned, tapered web configuration reduces thrust and improves chip evacuation. The bright, uncoated finish makes it a straightforward choice for shops that resharpen tooling regularly.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for use in machine shops, maintenance facilities, and trade environments where moderate hole depths in a variety of base materials are required. It is part of the Series R52 line, built to ANSI standards, and performs effectively in both production and one-off drilling operations. The straight shank accepts standard drill chucks without adapters. Right-hand cut only. Appropriate for use in drill presses, lathes, and handheld power tools where the workpiece and setup allow for controlled feed rates.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eWire size #53, 0.0595-inch decimal diameter for precise hole sizing\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle for general-purpose use across common materials\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction with bright, uncoated finish — resharpenable\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned, tapered web reduces drilling thrust and improves chip clearing\u003c\/li\u003e\n  \u003cli\u003eTaper length body (3-inch OAL, 1.75-inch flute) provides extra reach over jobber length\u003c\/li\u003e\n  \u003cli\u003eBuilt to ANSI standards, Series R52\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eRated for drilling into alloy steel, aluminum, aluminum alloy, brass, bronze, carbon steel, cast iron, cermet, copper, graphite, hardened steel, high strength bronze, magnesium, magnesium alloy, malleable iron, nickel, nickel alloy, reinforced plastic materials, and stainless steel.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis drill bit is installed and used by machinists, maintenance technicians, and trade professionals operating drill presses, lathes, or handheld power tools. Secure the straight shank firmly in a properly sized drill chuck before use. Always use appropriate cutting fluid or coolant for harder materials to extend tool life, even though this bit does not feature coolant-through capability. Inspect the cutting edges before each use and resharpen or replace the bit when wear is detected to maintain hole accuracy and prevent workpiece damage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire)\u003c\/strong\u003e: #53\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.0595 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length to Diameter Ratio\u003c\/strong\u003e: 6xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0595 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: R52\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.042 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6000200\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51723578409266,"sku":"6000200","price":86.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/db515ec7d9a3f71b49cd880ee78b1de7.jpg?v=1788606598","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-6000200-taper-length-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}