{"product_id":"precision-twist-drill-6000174-extra-length-drill-bit","title":"Precision Twist Drill 6000174 Extra Length Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRECISION TWIST DRILL 6000174 is a 1\/4 inch diameter extra length drill bit designed for deep-hole drilling applications where standard-length bits cannot reach. Built from high-speed steel with a bright uncoated finish, it delivers reliable cutting performance across a wide range of materials. The bit features a 118-degree standard point angle, a 12 inch overall length, and a 9 inch spiral flute length, making it well suited for extended reach work in fabrication, maintenance, and mechanical installation tasks. A web-thinned tip reduces entry force and improves centering accuracy. Licensed trades and experienced fabricators are the typical installers.\u003c\/p\u003e\n\u003cp\u003eThis bit is engineered for general-purpose drilling in non-ferrous metals, aluminum, magnesium, copper, nickel, and synthetic materials as primary workpiece targets. It also performs in secondary applications involving stainless steel, hardened steel, high-strength bronze, malleable iron, nickel alloys, and reinforced plastics. The 12xD flute-to-diameter ratio supports chip evacuation during deep passes. The straight cylindrical shank accepts standard three-jaw drill chucks without adapters, making this bit compatible with common handheld and bench-mount drilling equipment used across HVAC, plumbing, electrical, and general mechanical trades.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/4 inch diameter with 12 inch overall length for extended reach drilling\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned tip for reduced entry force\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction for durability across a broad material range\u003c\/li\u003e\n  \u003cli\u003e9 inch spiral flute length promotes efficient chip evacuation on deep passes\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank fits standard drill chucks without modification\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction, two-flute regular spiral configuration\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards for dimensional accuracy and geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose extra length drill bit compatible with standard three-jaw chucks on handheld drills, drill presses, and milling machines accepting a 1\/4 inch straight cylindrical shank. Rated for use in aluminum, magnesium, copper, nickel, synthetic, and titanium as primary materials, with secondary suitability for stainless steel, hardened steel, malleable iron, nickel alloys, and reinforced plastics.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the shank fully in the chuck before drilling and verify chuck tightness to prevent slipping during deep passes. Power down the drill completely before changing bits or adjusting chuck position. Use cutting fluid or appropriate lubricant when drilling ferrous metals or stainless steel to reduce heat buildup and extend bit life. Wear appropriate eye protection and secure the workpiece before beginning any drilling operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 9 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 12xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1290\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6000174\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51699917127986,"sku":"6000174","price":52.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/35e4a13a4e3bf0b87a27168127df1b6f.jpg?v=1788383345","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-6000174-extra-length-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}