{"product_id":"precision-twist-drill-6000049-reduced-shank-drill-bit","title":"Precision Twist Drill 6000049 Reduced Shank Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRECISION TWIST DRILL 6000049 is a reduced shank drill bit designed for general-purpose drilling in ferrous metals and a wide range of secondary materials. The 1-inch cutting diameter pairs with a 3\/4-inch straight-cylindrical shank, allowing the bit to fit standard chuck sizes while drilling larger holes. High speed steel construction provides the toughness needed for repeated use in production and service environments. The 118-degree standard point angle gives clean entry on most metals without requiring a center punch on flat stock. Overall length is 6 inches with a 3-inch flute length, keeping chip evacuation efficient at typical drilling depths.\u003c\/p\u003e\n\u003cp\u003eThis bit suits applications in HVAC, plumbing, and electrical trades where holes larger than 3\/4 inch are needed and a full-shank bit would require a larger chuck. The reduced shank design lets a standard 3\/4-inch drill chuck handle a 1-inch cut, making it practical for portable drills and drill presses commonly found on job sites. Compatible materials include ferrous metal, aluminum, copper, nickel, titanium, magnesium, and synthetic materials. The right-hand spiral flute with regular helix clears chips efficiently in through-hole and blind-hole drilling scenarios.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1-inch cutting diameter with 3\/4-inch reduced straight-cylindrical shank for standard chuck compatibility\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction for durability across ferrous and non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle for general-purpose use on flat and curved stock\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut with regular spiral flute for consistent chip removal\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish — no coating buildup to affect dimensional tolerances\u003c\/li\u003e\n  \u003cli\u003eANSI standard compliant, Series R58\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in 3\/4-inch or larger drill chucks on portable drills and drill presses. Suitable for drilling ferrous metal, aluminum, copper, magnesium, nickel, titanium, and synthetic materials in general-purpose applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall and removal should be performed with the drill unplugged or locked out per standard OSHA lockout\/tagout procedures. Secure the shank fully in the chuck jaws before operating. Use cutting fluid on harder ferrous materials to extend tool life and improve finish quality. Maximum drilling depth should not exceed the 3-inch flute length to maintain chip clearance.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/4 inch (0.7500 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Aluminum, Copper, Magnesium, Nickel, Synthetic, Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Required\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: R58\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.7 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6000049\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51694670938418,"sku":"6000049","price":115.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7b155e08561c2c7d1d5387807b1f6c56.jpg?v=1788326949","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-6000049-reduced-shank-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}