{"product_id":"precision-twist-drill-5999734-taper-length-drill-bit","title":"Precision Twist Drill 5999734 Taper Length Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRECISION TWIST DRILL 5999734 is a taper length drill bit designed for general-purpose drilling across a wide range of materials. Built from high speed steel with a bright, uncoated finish, this bit features a 118-degree standard point angle and a right-hand spiral flute configuration. The straight shank measures 0.1540 inches in diameter and fits standard drill chucks without adapters. With a flute length of 3 inches and an overall length of 5-3\/8 inches, this bit provides extended reach beyond what a jobber-length bit delivers while maintaining rigidity. It falls under the R52 series and meets ANSI standards.\u003c\/p\u003e\n\u003cp\u003eThis bit suits applications in metalworking, fabrication, and light industrial environments where standard jobber-length bits lack the reach needed for deeper holes. The taper length design gives additional clearance in confined bores. Compatible material applications include alloy steel, aluminum, brass, bronze, carbon steel, cast iron, copper, graphite, hardened steel, magnesium, malleable iron, nickel, stainless steel, and reinforced plastics. Machinists, toolmakers, pipefitters, and HVAC or plumbing fabricators working in metal shop or field settings will find this bit suited to everyday production drilling.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.1540 inch diameter, wire gauge size 23, straight shank for standard chuck compatibility\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction handles a broad range of ferrous and non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for easier penetration and reduced thrust\u003c\/li\u003e\n  \u003cli\u003e3-inch spiral flute length provides extended reach versus jobber-length equivalents\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut with regular spiral flute for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish — ANSI standard, general-purpose grade R52 series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard drill chucks accepting a 0.1540 inch straight shank. Suitable for drilling alloy steel, aluminum, aluminum alloy, brass, bronze, carbon steel, cast iron, cermet, copper, graphite, hardened steel, high strength bronze, magnesium, magnesium alloy, malleable iron, nickel, nickel alloy, reinforced plastic materials, and stainless steel.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the straight shank firmly in the drill chuck before operation and verify chuck jaws are fully tightened to prevent slippage. Power down the drill press or disconnect the tool before changing bits. Use appropriate cutting fluid or coolant when drilling hardened steel or stainless steel to extend bit life, even though this bit does not have through-coolant capability. Wear appropriate eye protection and secure workpieces properly before drilling.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.1540 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire)\u003c\/strong\u003e: 23\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1540 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length x Diameter Ratio\u003c\/strong\u003e: 6xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: R52\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.042 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5999734\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51720389263666,"sku":"5999734","price":23.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3478fa569ea00c61a9b0d05877a885e7.jpg?v=1788563210","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-5999734-taper-length-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}