{"product_id":"precision-twist-drill-5999692-taper-length-drill-bit","title":"Precision Twist Drill 5999692 Taper Length Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRECISION TWIST DRILL 5999692 is a taper length, straight-shank drill bit designed for general-purpose hole-making across a wide range of materials. Built from high speed steel (HSS) with a bright, uncoated finish, it features a 118-degree standard point angle and a web-thinned, tapered web configuration that reduces thrust at entry. The overall length is 10 inches, with a flute length of 6.125 inches, giving it extended reach compared to a jobber-length bit. The 0.8125-inch (13\/16-inch) diameter is matched to a straight shank of the same diameter. This bit suits machinists, fabricators, and maintenance technicians who need reliable, repeatable drilling performance in production and field settings.\u003c\/p\u003e\n\u003cp\u003eThe 5999692 is suited for drilling into alloy steel, carbon steel, stainless steel, cast iron, malleable iron, hardened steel, aluminum, aluminum alloy, brass, bronze, high strength bronze, copper, nickel, nickel alloy, magnesium, magnesium alloy, cermet, graphite, and reinforced plastic materials. Its taper length body is commonly used in applications requiring deeper hole penetration than a standard jobber bit allows, while the spiral flute geometry provides efficient chip evacuation. It installs in standard drill chucks and milling machine spindles that accept straight-shank tooling.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh speed steel construction for durability across ferrous and non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for reduced entry thrust\u003c\/li\u003e\n  \u003cli\u003eTaper length body at 10 inches OAL provides extended reach beyond jobber-length geometry\u003c\/li\u003e\n  \u003cli\u003eFlute-length-to-diameter ratio of 6xD supports efficient chip evacuation in deeper holes\u003c\/li\u003e\n  \u003cli\u003eStraight shank at 0.8125 inches fits standard drill chucks and milling spindles without adapters\u003c\/li\u003e\n  \u003cli\u003eRight-hand spiral flute, regular spiral type, no coolant-through requirement\u003c\/li\u003e\n  \u003cli\u003eANSI-standard Series R51 general-purpose grade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard drill chucks and milling machine spindles accepting 0.8125-inch straight-shank tooling. Compatible material applications include alloy steel, aluminum, aluminum alloy, brass, bronze, carbon steel, cast iron, cermet, copper, graphite, hardened steel, high strength bronze, magnesium, magnesium alloy, malleable iron, nickel, nickel alloy, reinforced plastic materials, and stainless steel.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or maintenance technicians using a drill press, milling machine, or hand-held drill with a chuck rated for 0.8125-inch straight-shank tooling. Secure the shank fully in the chuck jaws before operation and verify concentricity to avoid bit deflection. Power down and de-energize the machine before changing tooling. Follow applicable shop safety procedures and machine-specific operating guidelines when selecting feeds and speeds for the target material.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.8125 inches (13\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 10 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 6.125 inches (6-1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.8125 inches (13\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length to Diameter Ratio\u003c\/strong\u003e: 6xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThreaded Shank\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: R51\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5999692\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51713510048050,"sku":"5999692","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a628a8f1367fdd7287272e816508f71e.jpg?v=1788494210","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-5999692-taper-length-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}