{"product_id":"precision-twist-drill-5998675-jobber-length-drill-bit","title":"Precision Twist Drill 5998675 Jobber Length Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRECISION TWIST DRILL 5998675 is a jobber-length twist drill bit designed for general-purpose drilling in a wide range of metal and hard materials. Manufactured from high speed steel with a steam oxide coating, it measures 11\/16 inch (0.6875 inch) in diameter with an overall length of 7-5\/8 inches and a flute length of 5-5\/8 inches. The 118-degree standard point angle and web-thinned, tapered web geometry promote clean entry and reduce walking on flat surfaces. Licensed HVAC technicians, plumbers, electricians, and other trade professionals rely on this type of bit for structural drilling tasks on the job site or in the shop.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for drilling into steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and other hard materials, covering ISO material codes P, M, K, N, and S. The straight cylindrical shank fits standard drill chucks without adapters. The 2-flute spiral configuration clears chips efficiently during through-hole and deep drilling operations. At a flute-to-diameter ratio of 8xD and a maximum drilling depth of 5-5\/8 inches, it handles typical metal fabrication, equipment installation, and mechanical assembly applications found across plumbing, electrical, and HVAC trades.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e11\/16 inch (0.6875 inch) diameter with a 118-degree standard point angle for general-purpose metal drilling\u003c\/li\u003e\n  \u003cli\u003eSteam oxide coating provides corrosion resistance and reduces friction during cutting\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned, tapered web reduces thrust and improves penetration in tough materials\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, 2-flute regular spiral flute design promotes efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank fits standard 3-jaw drill chucks without modification\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI standards; Series R10-R15-R18 general-purpose grade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber-length drill bit compatible with any standard drill chuck accepting an 11\/16 inch straight cylindrical shank. Suitable for use with corded and cordless drills, drill presses, and magnetic drills configured for the 0.6875 inch shank diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation of this bit should be performed by a qualified tradesperson familiar with rotary cutting tools and appropriate personal protective equipment including safety glasses and gloves. Secure the shank fully in the drill chuck and verify runout before beginning a cut. Always center-punch the workpiece before drilling hard materials to prevent bit walking. Do not exceed the rated drilling depth of 5-5\/8 inches and retract the bit periodically to clear chips and prevent overheating.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 11\/16 inch (0.6875 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 7-5\/8 inches (7.625 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 5-5\/8 inches (5.625 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 5-5\/8 inches (5.625 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 11\/16 inch (0.6875 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Steam Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral, 2 Flutes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 8xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flats\u003c\/strong\u003e: 0\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: R10-R15-R18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5998675\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51689642852658,"sku":"5998675","price":63.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8285143b76113f15c5f987c3a55f96e2_809a6de4-021c-4a29-a8fc-f284b2cd271f.jpg?v=1788262299","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-5998675-jobber-length-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}