{"product_id":"precision-twist-drill-5995774-cobalt-drill-bit-0-1520-in","title":"Precision Twist Drill 5995774 Cobalt Drill Bit 0.1520 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PRECISION TWIST DRILL 5995774 is a taper length cobalt drill bit designed for high-performance drilling in demanding trade and industrial applications. Measuring 0.1520 inches in diameter (Wire Size 24) with a 3-inch flute length and an overall length of 5-3\/8 inches, this bit features a 135-degree split point for self-centering entry without a center punch. The cobalt tool material and coated finish provide elevated heat and wear resistance. The tapered web configuration and web-thinned geometry reduce thrust and improve chip evacuation. Right-hand spiral flute direction and a straight shank at 0.1520 inches make it compatible with standard chucks.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for residential and commercial maintenance, fabrication shops, and mechanical contracting environments where a wide range of materials must be drilled. The M52CO series is rated for use in alloy steel, carbon steel, stainless steel, hardened steel, cast iron, malleable iron, aluminum, aluminum alloy, brass, bronze, high strength bronze, copper, nickel, nickel alloy, magnesium, magnesium alloy, cermet, graphite, and reinforced plastic materials. The 6xD flute-to-diameter ratio supports deeper drilling passes with adequate chip clearance.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCobalt tool material with coated finish for extended tool life in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003e135-degree split point for self-centering starts and reduced walking on entry\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned, tapered web configuration reduces cutting thrust\u003c\/li\u003e\n  \u003cli\u003e3-inch spiral flute length with 6xD ratio supports deeper bore passes\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut with straight shank fits standard drill chucks\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty grade construction built to ANSI standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit taper length drill bit for use with standard straight-shank chuck systems. Suitable for drilling alloy steel, carbon steel, stainless steel, hardened steel, cast iron, aluminum, brass, bronze, copper, nickel alloys, magnesium alloys, cermet, graphite, and reinforced plastics as specified by the manufacturer.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit is installed by machinists, maintenance mechanics, pipefitters, and general tradespeople using standard drill presses, hand drills, or CNC equipment with a compatible chuck. Secure the straight shank firmly in the chuck before operation and verify chuck runout is within acceptable limits. Always wear appropriate eye protection and secure the workpiece before drilling. Follow applicable shop safety and tool-use protocols per your trade or facility guidelines.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.1520 inches (Wire Size 24)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length to Diameter Ratio\u003c\/strong\u003e: 6xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1520 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: M52CO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: Heavy-Duty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.042 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5995774\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51723790516530,"sku":"5995774","price":37.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4685106e62ec86928ee40045de795dcc_29b510fc-47e8-46b1-abd9-08e400652b72.jpg?v=1788608182","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-5995774-cobalt-drill-bit-0-1520-in","provider":"Voomi Supply","version":"1.0","type":"link"}