{"product_id":"precision-twist-drill-5995527-9-64-inch-hss-drill-bit","title":"Precision Twist Drill 5995527 9\/64 Inch Hss Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe PRECISION TWIST DRILL 5995527 is a jobber length drill bit designed for general purpose drilling in metal fabrication, maintenance, and repair applications. Built from high-speed steel (HSS) with a bright, uncoated finish, this bit features a 118-degree standard point angle and a web-thinned, tapered web for reduced thrust during entry. The straight shank measures 9\/64 inch (0.1406 inch) in diameter, and the overall length is 2.875 inches with a 1.75-inch flute length. The left-hand cutting direction makes this bit particularly useful for extracting broken fasteners or for use on left-hand drill presses and reversible machines. This is a Series L10 bit that meets ANSI standards.\u003c\/p\u003e\u003cp\u003eThis drill bit is suited for drilling steel and cast iron in production, shop, and field service environments. Typical users include machinists, millwrights, and maintenance technicians working with ferrous and non-ferrous materials. The regular spiral, two-flute configuration provides efficient chip evacuation during through-hole and blind-hole drilling operations at standard cutting speeds for HSS tooling. The left-hand cut is a key selection factor when the application calls for counter-rotation relative to a standard right-hand setup.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLeft-hand cutting direction for reverse-rotation applications and broken fastener extraction\u003c\/li\u003e\n\u003cli\u003e118-degree standard point angle with web-thinned tapered web for reduced entry thrust\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel (HSS) construction with bright uncoated finish\u003c\/li\u003e\n\u003cli\u003eRegular spiral, 2-flute design for consistent chip clearance\u003c\/li\u003e\n\u003cli\u003eStraight shank compatible with standard drill chucks\u003c\/li\u003e\n\u003cli\u003eMeets ANSI specifications for jobber length drill bits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general purpose jobber length drill bit for use in standard drill chucks accepting straight shank tooling. Primary workpiece materials include steel and cast iron. Compatible with any reversible drill press, handheld drill, or drill driver capable of left-hand rotation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use of this drill bit should be performed by a qualified machinist or tradesperson familiar with proper cutting speeds and feeds for HSS tooling in ferrous materials. Secure the straight shank firmly in the chuck before operation and confirm the machine is set to the correct left-hand rotation before engaging the workpiece. Coolant-through is not supported on this bit; use cutting fluid externally when drilling steel at extended depths. Inspect the cutting edges for wear or chipping before each use.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 9\/64 inch (0.1406 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1406 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: L10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.11 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PRECISION TWIST DRILL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5995527\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PRECISION TWIST DRILL","offers":[{"title":"Default Title","offer_id":51714098200882,"sku":"5995527","price":15.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/700097b531762e7d1f9969c9cacad3be_4d1a546b-bcb7-4abe-a731-135d08cf736c.jpg?v=1788496177","url":"https:\/\/voomisupply.com\/products\/precision-twist-drill-5995527-9-64-inch-hss-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}