{"product_id":"polaris-iplmd250-5-multi-tap-connector-600v-5-port","title":"Polaris IPLMD250-5 Multi-tap Connector 600V 5-port","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe POLARIS IPLMD250-5 is a pre-insulated multi-tap connector rated for 600 volts, designed for wire termination applications in electrical distribution work. It accepts both copper and aluminum conductors ranging from 6 AWG minimum to 250 MCM maximum, making it suitable for a wide range of feeder and branch circuit connections. The body is molded from high-dielectric-strength plastisol, which resists abrasion, chemicals, and UV exposure and will not support combustion. Five ports provide two-side entry, and removable access plugs close any unused entry port. Licensed electricians install this connector in panel troughs, wireways, and load centers where a reliable, insulated tap point is required without additional taping or covers.\u003c\/p\u003e\u003cp\u003eThis connector is built for use in residential and commercial electrical installations where multiple conductors must be terminated at a single point. The two-side entry layout allows conductors to enter from either side of the body, which is useful in tight trough or wireway installations. Mounting holes at each end of the connector allow it to be fastened directly to a trough, panel, or wireway for isolated, secure mounting. Class B and Class C wire types are supported. The connector ships with removable plugs over the hex screw access points, eliminating the need for post-installation taping or a separate insulating cover.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e600-volt rating with UL approval for both Canada and the United States\u003c\/li\u003e\n\u003cli\u003eAccepts conductors from 6 AWG to 250 MCM in copper or aluminum\u003c\/li\u003e\n\u003cli\u003e5-port, two-side entry design for flexible conductor routing in tight spaces\u003c\/li\u003e\n\u003cli\u003ePlastisol body is abrasion, chemical, and UV resistant and will not support combustion\u003c\/li\u003e\n\u003cli\u003eRemovable access plugs seal unused ports and cover hex screws, eliminating taping\u003c\/li\u003e\n\u003cli\u003eMounting holes at each end allow direct isolated mounting to trough, panel, or wireway\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-install multi-tap connector for use in electrical panel troughs, wireways, and load centers requiring insulated copper or aluminum conductor terminations up to 250 MCM at 600 volts.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. De-energize and lock out the circuit before making any connections. Use a 5\/16-inch hex wrench to tighten the set screws and observe the rated torque of 360 inch-pounds per the manufacturer specification. Insert removable plugs into any unused entry ports before restoring power.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating\u003c\/strong\u003e: 600 volts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Ports\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Entry\u003c\/strong\u003e: 2-side entry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Conductor Size\u003c\/strong\u003e: 6 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Conductor Size\u003c\/strong\u003e: 250 MCM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor Material\u003c\/strong\u003e: Copper\/Aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Type\u003c\/strong\u003e: Class B and C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque Rating\u003c\/strong\u003e: 360 inch-pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex\/Wrench Size\u003c\/strong\u003e: 5\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Plastisol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Pre-Insulated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: 90 degrees C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 6.14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2.28 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 2.37 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproval\u003c\/strong\u003e: UL (Canada and US)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: POLARIS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: IPLMD250-5\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"POLARIS","offers":[{"title":"Default Title","offer_id":51284027015474,"sku":"IPLMD250-5","price":150.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309279587.jpg?v=1781066491","url":"https:\/\/voomisupply.com\/products\/polaris-iplmd250-5-multi-tap-connector-600v-5-port","provider":"Voomi Supply","version":"1.0","type":"link"}