{"product_id":"parlec-h63-32erp406-er32-collet-chuck-hsk63a","title":"Parlec H63-32ERP406 ER32 Collet Chuck HSK63A","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe PARLEC H63-32ERP406 is an ER32 collet chuck with an HSK63A hollow taper shank, designed for precision toolholding in CNC machining centers. It accepts ER32 collets with a capacity range of 2 mm (0.0787 inches) to 20 mm (0.7874 inches), covering a wide range of cutting tool shanks. The chuck features a 4.06-inch projection, a nose diameter of 1.97 inches, and a guaranteed TIR of 0.0002 inches, supporting tight-tolerance work. Through-spindle coolant delivery is built in, directing coolant directly to the cutting zone. This toolholder is installed and balanced for use up to 25,000 RPM, making it suitable for high-speed machining applications.\u003c\/p\u003e\u003cp\u003eThis collet chuck is suited for use in CNC milling and machining centers equipped with HSK63A spindle interfaces. The ER32 collet system accommodates a broad range of end mills, drills, reamers, and taps within the 2 mm to 20 mm capacity range. It is appropriate for both production and job-shop environments where consistent runout control and coolant-through capability are required. Installation is performed by qualified CNC setup technicians or machinists during tooling changeovers.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eER32 collet system with 2 mm to 20 mm (0.0787 to 0.7874 inch) capacity range\u003c\/li\u003e\n\u003cli\u003eHSK63A hollow taper shank for rigid, repeatable spindle connection\u003c\/li\u003e\n\u003cli\u003e4.06-inch projection for reach in typical milling setups\u003c\/li\u003e\n\u003cli\u003e0.0002-inch TIR for precision runout control\u003c\/li\u003e\n\u003cli\u003eThrough-spindle coolant delivery for improved chip evacuation and tool life\u003c\/li\u003e\n\u003cli\u003eBalanced to 25,000 RPM for high-speed machining compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with HSK63A spindle interfaces and standard ER32 collets. Accepts ER coolant collets within the stated 2 mm to 20 mm capacity range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the spindle is fully stopped and the machine is in a safe, locked-out state before mounting or removing the toolholder. The HSK63A taper interface must be clean and free of debris or burrs before seating the chuck. Use the appropriate ER32 collet nut wrench as specified by the actuator type; do not use impact tools on the collet nut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollet System\u003c\/strong\u003e: ER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollet Series\u003c\/strong\u003e: ER32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Hollow Taper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper Size\u003c\/strong\u003e: HSK63A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Collet Capacity\u003c\/strong\u003e: 2.00 mm (0.0787 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Collet Capacity\u003c\/strong\u003e: 20.00 mm (0.7874 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProjection\u003c\/strong\u003e: 4.06 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTIR\u003c\/strong\u003e: 0.0002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNose Diameter\u003c\/strong\u003e: 1.97 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollet Nut Diameter\u003c\/strong\u003e: 1.97 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrough Coolant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Type\u003c\/strong\u003e: Through-Spindle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActuator Type\u003c\/strong\u003e: Wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced To\u003c\/strong\u003e: 25,000 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARLEC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H63-32ERP406\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARLEC","offers":[{"title":"Default Title","offer_id":52101227446578,"sku":"H63-32ERP406","price":462.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/85fe9e28fbe9a574588fa1e5763e5a09_32d9ea8b-2dda-419b-98d6-894b50f2e75c.jpg?v=1790069628","url":"https:\/\/voomisupply.com\/products\/parlec-h63-32erp406-er32-collet-chuck-hsk63a","provider":"Voomi Supply","version":"1.0","type":"link"}