{"product_id":"parlec-c50-12sm5-shell-mill-holder-cat50-1-25-in-pilot","title":"Parlec C50-12SM5 Shell Mill Holder CAT50 1.25 in Pilot","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARLEC C50-12SM5 is a CAT50 taper shank shell mill holder designed for mounting shell mill cutters on vertical and horizontal machining centers. The holder features a 1.25 inch pilot diameter and a 2.75 inch nose diameter, with a 5.5 inch projection from flange to nose end. Total indicated runout (TIR) is rated at 0.0002 inches, supporting high-precision face milling operations. Balanced to 30,000 RPM, this holder is suited for high-speed machining environments where vibration control and concentricity are critical. Licensed machinists and CNC setup technicians are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis shell mill holder is intended for use with shell mill cutters in the 3 to 3.5 inch cutting diameter range. It is compatible with CAT50 spindle interfaces found on full-size vertical machining centers and heavy-duty horizontal machining centers common in production and job shop environments. The 5\/8-18 lock screw thread and included lock screw (12LS) secure the cutter to the pilot. No through-coolant capability is provided, so coolant delivery must be handled externally or through the machine table setup.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCAT50 taper shank for use with full-size machining center spindles\u003c\/li\u003e\n  \u003cli\u003e1.25 inch pilot diameter accommodates shell mills in the 3 to 3.5 inch cutting diameter range\u003c\/li\u003e\n  \u003cli\u003e5.5 inch flange-to-nose projection for clearance in typical face milling setups\u003c\/li\u003e\n  \u003cli\u003eTIR of 0.0002 inches supports precision cutter seating and surface finish requirements\u003c\/li\u003e\n  \u003cli\u003eBalanced to 30,000 RPM for compatibility with high-speed spindle applications\u003c\/li\u003e\n  \u003cli\u003e5\/8-18 lock screw thread with 12LS lock screw included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with shell mill cutters having a 1.25 inch pilot bore and cutting diameters from 3 to 3.5 inches, mounted in CAT50 spindle interfaces on vertical or horizontal machining centers.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician with the spindle fully stopped and the machine placed in a safe lockout-tagout state. Inspect the CAT50 taper and spindle bore for chips or damage before seating the holder. Torque the lock screw to the cutter manufacturer specifications using the correct hex key for the 5\/8-18 thread. Verify runout with a dial indicator after mounting the cutter before beginning any cutting operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTaper Size\u003c\/strong\u003e: CAT50\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Taper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePilot Diameter\u003c\/strong\u003e: 1.25 inches (1-1\/4 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNose Diameter\u003c\/strong\u003e: 2.75 inches (2-3\/4 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProjection Flange to Nose End\u003c\/strong\u003e: 5.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShell Mill Cutting Diameter Range\u003c\/strong\u003e: 3 to 3.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTIR\u003c\/strong\u003e: 0.0002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Screw Thread Size\u003c\/strong\u003e: 5\/8-18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLock Screw\u003c\/strong\u003e: 12LS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBalanced To RPM\u003c\/strong\u003e: 30,000 RPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThrough Coolant\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 11 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARLEC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C50-12SM5\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARLEC","offers":[{"title":"Default Title","offer_id":51972053500210,"sku":"C50-12SM5","price":378.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/74c761e399513182292338c2407b8271.jpg?v=1789962116","url":"https:\/\/voomisupply.com\/products\/parlec-c50-12sm5-shell-mill-holder-cat50-1-25-in-pilot","provider":"Voomi Supply","version":"1.0","type":"link"}