{"product_id":"parker-vs379ptcr-12-12-male-swivel-elbow-3-4in-od-brass","title":"Parker VS379PTCR-12-12 Male Swivel Elbow 3\/4in Od Brass","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER VS379PTCR-12-12 is a push-to-connect male swivel elbow tube fitting designed for use in pneumatic and fluid transfer systems where a 90-degree direction change is required at a threaded port. The fitting accepts 3\/4 inch OD tubing on the push-to-connect end and connects to a 3\/4 inch NPTF male thread on the swivel end. Constructed from brass with Buna-N and nylon sealing components, it is rated to 250 psi and handles temperatures from -40 degrees F to 200 degrees F. The swivel design allows rotational alignment after installation, reducing stress on the tubing. Licensed HVAC technicians, plumbers, and mechanical contractors install this type of fitting in air brake, refrigerant line, and general-purpose fluid systems.\u003c\/p\u003e\n\u003cp\u003eThis fitting is suited for general-purpose applications in both mobile and stationary systems. It meets D.O.T. FMVSS 571.106, SAE J2494, SAE J2494-3, and SAE J844 standards, making it appropriate for air brake tubing circuits and other regulated pneumatic assemblies. The male NPTF thread provides a dry-seal connection that does not rely solely on tape or sealant to prevent leaks. The 1.6700 inch overall length and 1-3\/16 inch hex size are consistent with standard tooling for 3\/4 inch fittings. Installers working on compressed air distribution, fluid power manifolds, or vehicle brake systems will find this fitting a direct-fit solution.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePush-to-connect x male NPTF swivel elbow configuration for tool-free tube insertion\u003c\/li\u003e\n  \u003cli\u003eRated to 250 psi for use in pressurized pneumatic and fluid transfer lines\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of -40 degrees F to 200 degrees F\u003c\/li\u003e\n  \u003cli\u003eBrass body with Buna-N o-ring and nylon components for corrosion resistance and sealing durability\u003c\/li\u003e\n  \u003cli\u003eMeets D.O.T. FMVSS 571.106, SAE J2494, SAE J2494-3, and SAE J844 standards\u003c\/li\u003e\n  \u003cli\u003eSwivel end allows post-installation rotational adjustment to align tubing without twisting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with 3\/4 inch OD tubing in general-purpose pneumatic and fluid systems. Suitable for air brake circuits and other assemblies governed by D.O.T. and SAE J844 standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eShut down and depressurize the system fully before removing or installing any fittings. The NPTF thread is a dry-seal design; apply thread sealant per the system manufacturer's requirements and applicable codes. Tighten the hex with a properly sized wrench to avoid distorting the fitting body. Push tubing into the collet until it seats fully, then tug back to confirm retention before returning the system to service.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Push-to-Connect x Tube x Male NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube Outside Diameter\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 250 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 200 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.67 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHex Size\u003c\/strong\u003e: 1-3\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeal Material\u003c\/strong\u003e: Buna-N (Nitrile)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdditional Materials\u003c\/strong\u003e: Nylon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.26 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: D.O.T. FMVSS 571.106, SAE J2494, SAE J2494-3, SAE J844\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: VS379PTCR-12-12\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51540458701106,"sku":"VS379PTCR-12-12","price":54.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4629ea3b2cb175cb30855e03cc642183.jpg?v=1785855820","url":"https:\/\/voomisupply.com\/products\/parker-vs379ptcr-12-12-male-swivel-elbow-3-4in-od-brass","provider":"Voomi Supply","version":"1.0","type":"link"}