{"product_id":"parker-vs279ab-10-6-brass-45-elbow-3-8-18-nptf","title":"Parker VS279AB-10-6 Brass 45 Elbow 3\/8-18 Nptf","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER VS279AB-10-6 is a brass compression-to-male NPTF 45-degree elbow fitting designed for use in fluid and pneumatic tubing systems. It connects a compression tube end to a male NPTF threaded port at a 45-degree angle, allowing directional routing in tight or angled installations. The fitting is rated to 400 psi maximum working pressure and handles temperatures from -65 degrees F to 250 degrees F. With a 0.408-inch inside diameter, it suits 3\/8-18 NPTF thread applications. Installers in plumbing, HVAC, and hydraulic system work rely on this type of fitting for reliable, leak-resistant tube terminations where a straight fitting will not clear surrounding hardware.\u003c\/p\u003e\n\u003cp\u003eThis fitting is suited for residential and light commercial fluid system applications including hydraulic lines, pneumatic control circuits, and general-purpose tubing runs. The 45-degree elbow geometry is useful where tubing must change direction without a sharp bend, reducing stress on the tube wall. The NPTF male thread provides a dry-seal connection, minimizing the need for additional thread sealant when properly torqued. It is commonly installed in equipment panels, manifold assemblies, and inline service points where space constraints prevent the use of a straight compression fitting.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e45-degree elbow geometry allows angled tube routing in space-constrained installations\u003c\/li\u003e\n  \u003cli\u003eBrass construction provides corrosion resistance for water, air, and compatible fluid service\u003c\/li\u003e\n  \u003cli\u003eCompression x Male NPTF end connections for secure, leak-resistant assembly\u003c\/li\u003e\n  \u003cli\u003eRated to 400 psi maximum working pressure\u003c\/li\u003e\n  \u003cli\u003eWide temperature range: -65 degrees F to 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e3\/8-18 NPTF thread standard for dry-seal performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style compression fitting for tubing systems requiring a 3\/8-18 NPTF male thread connection with a compression tube inlet at a 45-degree offset angle.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by licensed plumbers, pipefitters, or HVAC technicians. Depressurize and isolate the system completely before removing or installing any compression fitting. Ensure the tube end is cut square and deburred before seating it into the compression sleeve to achieve a proper seal. Follow applicable codes such as the IPC or system manufacturer guidelines for thread engagement and tube insertion depth.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Male 45 Degree Elbow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connections\u003c\/strong\u003e: Compression x Male NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 3\/8-18 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.408 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 400 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Temperature\u003c\/strong\u003e: -65 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.27 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: VS279AB-10-6\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51538879807794,"sku":"VS279AB-10-6","price":45.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/95033c7902f78a7a33cea42011376d0d.jpg?v=1785828747","url":"https:\/\/voomisupply.com\/products\/parker-vs279ab-10-6-brass-45-elbow-3-8-18-nptf","provider":"Voomi Supply","version":"1.0","type":"link"}