{"product_id":"parker-pt-00080-steel-flared-tube-reducer-1-1-2-in-flare","title":"Parker PT-00080 Steel Flared Tube Reducer 1-1\/2 in Flare","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe PARKER PT-00080 is a steel flared tube reducer fitting designed to connect two flared tube lines of differing sizes in high-pressure hydraulic and fluid power systems. It features a 37-degree flare angle and Flare x Flare end connections, with a 1-1\/2 inch outside diameter on the larger end and a 1-1\/4 inch thread on the smaller end. Rated to 3000 psi maximum working pressure and capable of handling temperatures up to 500 degrees F, this reducer is built for demanding industrial and mobile equipment applications. Licensed plumbers, pipefitters, and fluid power technicians install this fitting where tube line size transitions are required in high-pressure circuits.\u003c\/p\u003e\u003cp\u003eThis fitting is suited for use in hydraulic systems, fluid power assemblies, and high-pressure plumbing lines where a tube OD reduction is needed between two flared connections. Its steel construction and 37-degree flare geometry conform to ISO 8434-2, SAE J514, and SAE 070123 standards, making it appropriate for both OEM manufacturing environments and field service repairs on industrial and mobile hydraulic equipment.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e37-degree flare angle conforms to ISO 8434-2 and SAE J514 standards\u003c\/li\u003e\n\u003cli\u003eFlare x Flare end connections for secure, leak-resistant tube joints\u003c\/li\u003e\n\u003cli\u003e3000 psi maximum working pressure rating for high-pressure circuits\u003c\/li\u003e\n\u003cli\u003eMaximum working temperature of 500 degrees F (260 degrees C)\u003c\/li\u003e\n\u003cli\u003eSteel construction for durability in demanding hydraulic and fluid power applications\u003c\/li\u003e\n\u003cli\u003eOverall length of 2.46 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or service fitting for high-pressure hydraulic and fluid power tube assemblies requiring a 37-degree flare reducer with a 1-1\/2 inch tube OD and 1-1\/2 x 1-1\/4 inch thread configuration.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified pipefitter, hydraulic technician, or licensed plumber following applicable industry codes. Depressurize and isolate the hydraulic circuit completely before removing or installing any fittings. Inspect flare seats on both mating tube ends for damage or deformation before assembly, as compromised seats can cause leaks under pressure. Tighten to the fitting manufacturer's recommended procedure and verify for leaks before returning the system to service.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Reducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x Flare\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlared Angle\u003c\/strong\u003e: 37 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1-1\/2 x 1-1\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.46 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 3000 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 500 degrees F (260 degrees C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ISO 8434-2, SAE J514, SAE 070123\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PT-00080\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51543907402034,"sku":"PT-00080","price":84.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4c022e488b4d138ca1c44cb2f85705be.jpg?v=1785922342","url":"https:\/\/voomisupply.com\/products\/parker-pt-00080-steel-flared-tube-reducer-1-1-2-in-flare","provider":"Voomi Supply","version":"1.0","type":"link"}