{"product_id":"parker-pn351-25-male-pipe-thread-nipple-3-8-in-brass-200-psi","title":"Parker PN351-25 Male Pipe Thread Nipple 3\/8 in Brass 200 Psi","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER PN351-25 is a brass male pipe thread extended nipple fitting rated for 200 psi maximum working pressure. Part of the Parker Moldmate series, this straight, non-valved fitting connects hydraulic hose assemblies to threaded ports using an NPTF shaft type for a pressure-tight seal. With a 3\/8 inch body diameter and 1\/8 inch thread size, it is sized for compact circuits where a standard nipple length is insufficient. Operating temperatures range from -20 degrees F to 400 degrees F, making it suitable for demanding fluid-transfer environments. Hydraulic technicians and fluid-power specialists install this fitting in low-to-medium pressure circuits.\u003c\/p\u003e\n\u003cp\u003eThe PN351-25 is intended for use with die casting equipment and mold coolant lines, consistent with its Moldmate series designation. Its brass construction resists corrosion in coolant and hydraulic fluid service. The NPTF thread form provides a metal-to-metal seal that reduces the need for additional thread sealant. This fitting suits industrial facilities where mold temperature control circuits require reliable, leak-free connections at moderate pressures.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e200 psi maximum working pressure for low-to-medium pressure hydraulic and coolant circuits\u003c\/li\u003e\n  \u003cli\u003eBrass construction offers corrosion resistance in coolant and hydraulic fluid service\u003c\/li\u003e\n  \u003cli\u003eNPTF threaded shaft type provides a pressure-tight metal-to-metal seal\u003c\/li\u003e\n  \u003cli\u003eWide temperature range: -20 degrees F to 400 degrees F\u003c\/li\u003e\n  \u003cli\u003eStraight, non-valved design simplifies installation and flow path\u003c\/li\u003e\n  \u003cli\u003ePart of the Parker Moldmate series, engineered for die casting and mold coolant applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with die casting equipment and mold coolant lines as part of the Parker Moldmate series. Fits circuits with 3\/8 inch hose and 1\/8 inch NPTF threaded ports.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eHydraulic or fluid-power technicians should depressurize and drain the circuit fully before removing or installing any fitting. NPTF threads are designed to seal on the thread form itself; inspect threads for damage before installation and apply thread sealant only if required by the system specification. Use appropriately sized open-end or crow-foot wrenches and avoid over-tightening, which can crack brass fittings or distort thread seals. Follow applicable facility safety procedures and relevant industry fluid-power standards during service.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Male Pipe Thread Extended Nipple\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Moldmate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 200 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Size\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShape\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShaft Type\u003c\/strong\u003e: NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eValve Configuration\u003c\/strong\u003e: Non-Valved\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Temperature\u003c\/strong\u003e: 400 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Temperature\u003c\/strong\u003e: -20 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.07 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor Use With\u003c\/strong\u003e: Die Casting Equipment, Mold Coolant Lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PN351-25\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51541482701106,"sku":"PN351-25","price":21.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0593911964ddfa7277a8ce89db7fd128.jpg?v=1785877418","url":"https:\/\/voomisupply.com\/products\/parker-pn351-25-male-pipe-thread-nipple-3-8-in-brass-200-psi","provider":"Voomi Supply","version":"1.0","type":"link"}