{"product_id":"parker-pc316v-bp-90-deg-push-lok-hose-barb-coupler-3-8-in","title":"Parker PC316V-BP 90 Deg Push-lok Hose Barb Coupler 3\/8 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER PC316V-BP is a 90-degree Push-Lok hose barb coupler designed for fluid transfer applications requiring a secure, tool-free hose connection. Built from brass, this valved fitting accepts 3\/8-inch hose diameter and is rated to 200 psi working pressure. The valved design allows the line to be disconnected without full system depressurization, making it a practical choice for maintenance-intensive installations. It carries a temperature range of -20 degrees F to 400 degrees F, supporting use across a wide range of hydraulic and pneumatic service conditions. Licensed plumbing and hydraulic technicians install this type of fitting in both stationary and mobile fluid power systems.\u003c\/p\u003e\n\u003cp\u003eThe PC316V-BP is suited for residential and light commercial fluid systems where a 90-degree hose routing change is needed at the connection point. Its non-threaded, Push-Lok barb design allows the hose to be pushed directly onto the barb and secured without clamps or threading tools, simplifying installation in tight spaces. The Moldmate series designation indicates a standardized form factor consistent with Parker line fittings used in hydraulic hose assemblies. This fitting is appropriate for applications where hose routing must change direction at the coupling point.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e90-degree Push-Lok hose barb configuration for directional hose routing at the connection point\u003c\/li\u003e\n  \u003cli\u003eValved design allows disconnect without full system depressurization\u003c\/li\u003e\n  \u003cli\u003eBrass construction provides corrosion resistance in fluid transfer environments\u003c\/li\u003e\n  \u003cli\u003e200 psi pressure rating suitable for low-to-medium pressure hydraulic and pneumatic lines\u003c\/li\u003e\n  \u003cli\u003eWide service temperature range: -20 degrees F to 400 degrees F\u003c\/li\u003e\n  \u003cli\u003eNon-threaded barb end accepts 3\/8-inch hose with no clamps or thread sealant required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation fitting for 3\/8-inch Push-Lok hose assemblies within the Parker Moldmate series product line.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis fitting is typically installed by licensed hydraulic technicians or plumbers working on low-to-medium pressure fluid systems. Before disconnecting or replacing any fitting, relieve system pressure fully and follow applicable lockout\/tagout procedures. Push the hose firmly onto the barb until it seats against the fitting body stop. Inspect the connection for leaks before returning the system to full operating pressure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: 90 Degree Push-Lok Hose Barb Coupler\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Moldmate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eValve Type\u003c\/strong\u003e: Valved\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShaft Type\u003c\/strong\u003e: Non-Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure Rating\u003c\/strong\u003e: 200 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Temperature\u003c\/strong\u003e: 400 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Temperature\u003c\/strong\u003e: -20 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 2.78 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 0.88 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.88 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.37 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 40141734\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PC316V-BP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51538879021362,"sku":"PC316V-BP","price":79.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5437b76400571cefcfaa89710fe52db1.jpg?v=1785828732","url":"https:\/\/voomisupply.com\/products\/parker-pc316v-bp-90-deg-push-lok-hose-barb-coupler-3-8-in","provider":"Voomi Supply","version":"1.0","type":"link"}