{"product_id":"parker-pc206av-hose-barb-straight-coupler-0-375-in-200-psi","title":"Parker PC206AV Hose Barb Straight Coupler 0.375 in 200 Psi","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe PARKER PC206AV is a valved hose barb straight coupler designed for fluid control in industrial cooling and die casting applications. Constructed from brass, this coupler features a 0.375-inch hose inside diameter and a 0.25-inch body diameter, with a maximum working pressure rating of 200 psi. The straight configuration and threaded connection type make it straightforward to integrate into existing plumbing runs. The non-threaded shaft (barb end) locks onto compatible hose without additional fittings. Part of the Moldmate series, this coupler is suited for technicians and tradespeople working on precision coolant line assemblies.\u003c\/p\u003e\n\u003cp\u003eThe PC206AV is engineered for use with die casting equipment and mold coolant lines, where reliable sealing and consistent flow control are critical. Its valved design allows the line to be disconnected without full system drainage, reducing downtime during maintenance. The operating temperature range spans from -20 degrees F to 400 degrees F, making it suitable for demanding thermal environments found in industrial manufacturing and process cooling setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eValved design allows disconnection without full system drain-down\u003c\/li\u003e\n  \u003cli\u003eBrass construction for corrosion resistance in coolant and fluid service\u003c\/li\u003e\n  \u003cli\u003e0.375-inch hose inside diameter with straight barb profile for secure hose retention\u003c\/li\u003e\n  \u003cli\u003e200 psi maximum working pressure\u003c\/li\u003e\n  \u003cli\u003eWide temperature range: -20 degrees F to 400 degrees F\u003c\/li\u003e\n  \u003cli\u003ePart of the Moldmate series, purpose-built for die casting and mold coolant line applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with die casting equipment and mold coolant lines as part of the Parker Moldmate series. Compatible with 3\/8-inch hose inside diameter plumbing runs requiring a valved straight coupler with threaded body connection.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by industrial maintenance technicians or plumbers familiar with hydraulic and process cooling systems. Depressurize and isolate the coolant line fully before disconnecting or installing any coupler. Verify hose inside diameter matches the 0.375-inch barb before assembly to ensure a leak-free connection. Follow applicable facility safety procedures and relevant fluid system codes when working on pressurized lines.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Hose Barb Straight Coupler\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Inside Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 200 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Temperature\u003c\/strong\u003e: 400 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Temperature\u003c\/strong\u003e: -20 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShaft Type\u003c\/strong\u003e: Non-Threaded (Barb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eValve Type\u003c\/strong\u003e: Valved\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShape\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Moldmate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: PC206AV\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51542544351538,"sku":"PC206AV","price":44.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d16e46e516283b19cc47978bd849aedf_4bddda62-e5ca-43ca-8f8a-261351addc09.jpg?v=1785903317","url":"https:\/\/voomisupply.com\/products\/parker-pc206av-hose-barb-straight-coupler-0-375-in-200-psi","provider":"Voomi Supply","version":"1.0","type":"link"}