{"product_id":"parker-p2fca447-solenoid-valve-normally-closed-12v","title":"Parker P2FCA447 Solenoid Valve Normally Closed 12V","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe PARKER P2FCA447 is a direct-acting, normally closed solenoid valve designed for precise fluid control in industrial and process applications. Built with a thermoplastic body and FKM fluorocarbon seals, it handles operating pressures from 22 psi up to 232 psi and tolerates media temperatures up to 158 degrees F. The valve operates on 12 volts DC and features a Class F coil with an ISO 4400 Form A 20 mm square 3-pin coil lead connection. It carries an IP 65 enclosure rating, making it suitable for environments where dust and water contact are a concern. Licensed technicians and industrial service professionals are the typical installers for this valve type.\u003c\/p\u003e\u003cp\u003eThe P2FCA447 is noted for use with the Parker Viking Xtreme Valve platform, making it relevant for installations where that valve series is already deployed. Direct-acting construction means the valve does not rely on a pressure differential to open or close, which is useful in low-pressure or zero-pressure-differential scenarios. The IP 65 rating and FKM seal material support use in moderately aggressive fluid and environmental conditions. This valve ships as a single unit and is well suited to OEM equipment builds, replacement service work, and process control panel assembly.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDirect-acting, normally closed operation — closes when de-energized, no pressure differential required\u003c\/li\u003e\n\u003cli\u003eThermoplastic body construction for corrosion resistance in fluid handling applications\u003c\/li\u003e\n\u003cli\u003eFKM fluorocarbon seal material for compatibility with a broad range of media\u003c\/li\u003e\n\u003cli\u003e12 volt DC coil with Class F insulation rating\u003c\/li\u003e\n\u003cli\u003eISO 4400 Form A 20 mm square 3-pin coil lead for standardized electrical connection\u003c\/li\u003e\n\u003cli\u003eIP 65 enclosure rating for resistance to dust ingress and low-pressure water contact\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eSpecified for use with the Parker Viking Xtreme Valve. Verify coil lead connector type and voltage requirements against the target system before ordering.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified technician familiar with fluid control systems and applicable local codes. De-energize and depressurize the system fully before removing or installing the valve. Confirm media compatibility with both the thermoplastic body and FKM seals prior to installation. Ensure the coil lead connection matches ISO 4400 Form A requirements at the panel or controller side.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eValve Type\u003c\/strong\u003e: Direct Acting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnactuated State\u003c\/strong\u003e: Normally Closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Thermoplastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal Material\u003c\/strong\u003e: FKM Fluorocarbon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e: 12 volts DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Working Pressure\u003c\/strong\u003e: 22 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 232 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCv Factor (NC)\u003c\/strong\u003e: 0.0350\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Type\u003c\/strong\u003e: Class F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoil Lead Connection\u003c\/strong\u003e: 20 mm Square 3-Pin, ISO 4400 Form A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Temperature\u003c\/strong\u003e: 158 degrees F (60 degrees C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure Rating\u003c\/strong\u003e: IP 65\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: P2FCA447\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51543462314290,"sku":"P2FCA447","price":55.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/84e3e5b5e024a2bfcc17bdf3d0692827_3ae893ec-73b5-4ef5-b7ef-6a616cee5f4a.jpg?v=1785918965","url":"https:\/\/voomisupply.com\/products\/parker-p2fca447-solenoid-valve-normally-closed-12v","provider":"Voomi Supply","version":"1.0","type":"link"}