{"product_id":"parker-nv104c-4-4-angled-needle-valve-1-4-in-brass","title":"Parker NV104C-4-4 Angled Needle Valve 1\/4 in Brass","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe PARKER NV104C-4-4 is an angled needle valve designed for precise flow control in compressed air, hydraulic, and fluid system lines. It features a brass body and brass needle, with a compression inlet and male pipe outlet configuration in a 1\/4 inch size. Rated to 150 psi maximum working pressure, it handles temperatures from -45 degrees F to 250 degrees F. The compact form factor — 1.38 inches overall length and 1.8 inches overall height — suits tight installation spaces. Licensed plumbers and HVAC technicians commonly install this valve for metering or shutoff service in low-to-medium pressure systems.\u003c\/p\u003e\u003cp\u003eThis valve is suited for residential and light commercial applications where a compact angled configuration is needed to redirect flow while maintaining fine throttle control. Typical installations include compressed air lines, refrigeration service ports, fuel lines, and instrumentation tubing where a 1\/4 inch NPTF threaded outlet and 1\/4 inch OD tube compression connection are required. Its angled body makes routing easier in panel or manifold-mounted assemblies.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAngled body style for easier routing in confined or panel-mount installations\u003c\/li\u003e\n\u003cli\u003eCompression inlet to 1\/4 inch male NPTF pipe outlet configuration\u003c\/li\u003e\n\u003cli\u003eBrass body and brass needle for corrosion resistance in common fluid and air service\u003c\/li\u003e\n\u003cli\u003e150 psi maximum working pressure rating\u003c\/li\u003e\n\u003cli\u003eWide operating temperature range: -45 degrees F to 250 degrees F\u003c\/li\u003e\n\u003cli\u003eCompact size: 1.38 inches overall length, 1.8 inches overall height\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with 1\/4 inch OD tubing on the compression end and 1\/4 inch NPTF threaded ports on the male pipe end, suitable as an OEM-style or replacement needle valve in low-to-medium pressure fluid and gas control applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a licensed plumber, HVAC technician, or qualified pipefitter familiar with the applicable system type and local codes. Depressurize and isolate the system fully before removing any existing valve or fitting. Apply appropriate thread sealant to NPTF connections per the system fluid compatibility requirements. Do not exceed the rated working pressure or temperature limits of the valve.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle\u003c\/strong\u003e: Angled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe Size\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Compression to Male Pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: NPTF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Outside Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 150 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -45 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height\u003c\/strong\u003e: 1.8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeedle Material\u003c\/strong\u003e: Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.14 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: PARKER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: NV104C-4-4\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PARKER","offers":[{"title":"Default Title","offer_id":51540219953458,"sku":"NV104C-4-4","price":44.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/40e2700d2432df513ea3119131ab71b7.jpg?v=1785849282","url":"https:\/\/voomisupply.com\/products\/parker-nv104c-4-4-angled-needle-valve-1-4-in-brass","provider":"Voomi Supply","version":"1.0","type":"link"}